//==============================================================================
// ASIX AX88772/AX88772A/AX88772B Windows 10 driver
//
// This document describes the driver's configurable parameters.
//==============================================================================
1. Speed & Duplex: Set the Ethernet link speed.
-Auto Negotiation: Auto detect the Ethernet link speed
-10 Mbps Half Duplex: Set the Ethernet works on 10HD
-10 Mbps Full Duplex: Set the Ethernet works on 10FD
-100 Mbps Half Duplex: Set the Ethernet works on 100HD
-100 Mbps Full Duplex: Set the Ethernet works on 100FD
2. NetworkAddress : Allows user to set a MAC address of the device or use the
device default address.
3. FlowControl: Configure flow control advertised capabilities
-Disabled Disable flow control
-TxEnabled Enable transmit flow control
-RxEnabled Enable receive flow control
-RxTxEnabled Enable transmit and receive flow control
4. WakeOnLinkChange: Wake up the computer when device detects Ehernet link Changed
-Disabled Disable WakeOnLinkChange function
-Enabled Enable WakeOnLinkChange function
5. Packet Priority & VLAN: Enable or disable the ability to insert the 802.1Q
priority and VLAN tags into the transmit packets.
-Packet Priority & VLAN Disabled Disable to insert the 802.1Q priority and VLAN tag
-Packet Priority Enabled Only enable to insert the 802.1Q priority tag
-VLAN Enabled Only enable to insert the 802.1Q VLAN tag
-Packet Priority & VLAN Enabled Enable to insert the 802.1Q priority and VLAN tag
6. VLAN ID: If user set a valid VLAN ID, the driver inserts the VLAN tag with
this VLAN ID into the transmit packets and device will filter the
received packets.
7. WakeOnMagicPacket: Wake up the computer when device receives a Magic Packet
-Disabled Disable WakeOnMagicPacket function
-Enabled Enable WakeOnMagicPacket function
8. WakeOnPattern: Wake up the computer when device receives a packet that matches a
specified pattern
-Disabled Disable WakeOnPattern function
-Enabled Enable WakeOnPattern function
9. SelectiveSuspend: Allows NDIS to suspend an idle AX88772B network adapter by
transitioning the adapter to a low-power state
-Disabled Disable SelectiveSuspend function
-Enabled Enable SelectiveSuspend function
10. SSIdleTimeout: Selective suspend idle time-out in units of seconds
11. TCPChecksumOffloadV4: Enable or disable the device to calculate the
TCP checksum of the transmit IPv4 packets and
check the TCP checksum of the received IPv4
packets.
-Disabled Disable the TCP Checksum Offload
-TxEnabled Enable the TCP Checksum Offload for transmit packets
-RxEnabled Enable the TCP Checksum Offload for received packets
-RxTxEnabled Enable the TCP Checksum Offload for transmit and received packets
12. UDPChecksumOffloadV4: Enable or disable the device to calculate the
UDP checksum of the transmit IPv4 packets and
check the UDP checksum of the received IPv4 packets.
-Disabled Disable the UDP Checksum Offload
-TxEnabled Enable the UDP Checksum Offload for transmit packets
-RxEnabled Enable the UDP Checksum Offload for received packets
-RxTxEnabled Enable the UDP Checksum Offload for transmit and received packets
13. TCPChecksumOffloadV6: Enable or disable the device to calculate the
TCP checksum of the transmit IPv6 packets and
check the TCP checksum of the received IPv6 packets.
-Disabled Disable the TCP Checksum Offload
-TxEnabled Enable the TCP Checksum Offload for transmit packets
-RxEnabled Enable the TCP Checksum Offload for received packets
-RxTxEnabled Enable the TCP Checksum Offload for transmit and received packets
14. UDPChecksumOffloadV6: Enable or disable the device to calculate the
UDP checksum of the transmit IPv6 packets and
check the UDP checksum of the received IPv6 packets.
-Disabled Disable the UDP Checksum Offload
-TxEnabled Enable the UDP Checksum Offload for transmit packets
-RxEnabled Enable the UDP Checksum Offload for received packets
-RxTxEnabled Enable the UDP Checksum Offload for transmit and received packets
15. IPChecksumOffloadV4: Enable or disable the device to calculate the IP
checksum of the transmit IPv4 packets and check the
IP checksum of the received IPv4 packets.
-Disabled Disable the IP Checksum Offload
-TxEnabled Enable the IP Checksum Offload for transmit packets
-RxEnabled Enable the IP Checksum Offload for received packets
-RxTxEnabled Enable the IP Checksum Offload for transmit and received packets
16. ArpOffload: When enable this ability, the device will reply the ARP request
packet when computer is suspending. This ability is activated only
if WOL is enabled.
-Disabled Disable ARP Offload
-Enabled Enable ARP Offload
17. NSOffload: When enable this ability, the device will reply the neighbor
solicitation packet when computer is suspending. This ability is
activated only if WOL is enabled.
-Disabled Disable NS Offload
-Enabled Enable NS Offload
18. AutoDetach: Enable or disable AutoDetach ability. if AutoDetach is enabled,
3 seconds later after Ethernet cable was unpluged, the device will
be detached from USB.
-Disabled Disable AutoDetach
-Enabled Enable AutoDetach
-Use EEPROM Setting Disable or enable AutoDetach accoring to the EEPROM setting
19. MaskTimer: If wake up ability is enabled, the wake up function will delay this
time to active.
-0,4,8,12,16,20,24,28 seconds
20. WolLinkSpeed: Set the Ethernet link speed when device sleeps if wake up
ability is enabled.
-10 Mbps First The Ethernet link speed works on 10 Mbps first if available
-Use EEPROM Setting Use EEPROM setting to set Ethernet link speed
