david/Repository
1
0
Fork 0
Code Releases Activity
Files
main
Repository/Tools/UniExtractRC3/UniExtract/docs/third-party/unzoo.c
David Wuibaille 7cc3011354 Auto-commit: 2025-10-31 08:58:35
2025-10-31 08:58:36 +01:00

2848 lines
113 KiB
C
Raw Permalink Blame History

/****************************************************************************
**
*A unzoo.c Tools Martin Schoenert
**
*H @(#)$Id: unzoo.c,v 4.4 2000/05/29 08:56:57 sal Exp $
**
*Y This file is in the Public Domain.
**
** SYNTAX
**
** 'unzoo'
** 'unzoo [-l] [-v] <archive>[.zoo] [<file>..]'
** 'unzoo -x [-abnpo] <archive>[.zoo] [<file>..]'
**
** DESCRIPTION
**
** 'unzoo' is a zoo archive extractor. A zoo archive is a file that
** contains several files, called its members, usually in compressed form to
** save space. 'unzoo' can list all or selected members or extract all or
** selected members, i.e., uncompress them and write them to files. It
** cannot add new members or delete members. For this you need the zoo
** archiver, called 'zoo', written by Rahul Dhesi.
**
** If you call 'unzoo' with no arguments, it will first print a summary of
** the commands and then prompt for command lines interactively, until you
** enter an empty line. This is useful on systems that do not support the
** notion of command line arguments such as the Macintosh.
**
** If you call 'unzoo' with the '-l' option, it lists the members in the
** archive <archive>. For each member 'unzoo' prints the size that the
** extracted file would have, the compression factor, the size that the
** member occupies in the archive (not counting the space needed to store
** the attributes such as the path name of the file), the date and time when
** the files were last modified, and finally the path name itself. Finally
** 'unzoo' prints a grand total for the file sizes, the compression factor,
** and the member sizes.
**
** The '-v' suboption causes 'unzoo' to append to each path name, separated
** by a ';', the generation number of the member, where higher numbers mean
** later generations. Members for which generations are disabled are listed
** with ';0'. Also 'unzoo' will print the comments associated with the
** archive itself or the members, preceeded by the string '# '.
**
** If you call 'unzoo' with the '-x' option, it extracts the members from
** the archive <archive>. Members are stored with a full path name in the
** archive and if the operating system supports this, they will be extracted
** into appropriate subdirectories, which will be created on demand.
** The members are usually extracted as binary files, with no translation.
** However, if a member has a comment that starts with the string '!TEXT!',
** it is extracted as a text file, i.e., it will be translated from the
** universal text file format (with <lf> as line separator as under UNIX) to
** the local text file format (e.g., with <cr>/<lf> as separator under DOS).
** If the archive itself has a comment that starts with '!TEXT!' then all
** members will be extracted as text files, even those that have no comment.
** For each member the name is printed followed by '-- extracted as binary'
** or '-- extracted as text' when the member has been completely extracted.
**
** The '-a' suboption causes 'unzoo' to extract all members as text files,
** even if they have no comment starting with '!TEXT!'.
**
** The '-b' suboption causes 'unzoo' to extract all members as binary files,
** even if they have a comment starting with '!TEXT!'.
**
** The '-n' suboption causes 'unzoo' to suppress writing the files. You use
** this suboption to test the integrity of the archive without extracting
** the members. For each member the name is printed followed by '-- tested'
** if the member is intact or by '-- error, CRC failed' if it is not.
**
** The '-p' suboption causes 'unzoo' to print the files to stdout instead of
** writing them to files.
**
** The '-o' suboption causes 'unzoo' to overwrite existing files without
** asking you for confirmation. The default is to ask for confirmation
** '<file> exists, overwrite it? (Yes/No/All/Ren)'. To this you can answer
** with 'y' to overwrite the file, 'n' to skip extraction of the file, 'a'
** to overwrite this and all following files, or 'r' to enter a new name for
** the file. 'unzoo' will never overwrite existing read-only files.
**
** The '-j <prefix>' suboption causes 'unzoo' to prepend the string <prefix>
** to all path names for the members before they are extracted. So for
** example if an archive contains absolute path names under UNIX, '-j ./'
** can be used to convert them to relative pathnames. This option is also
** useful on the Macintosh where you start 'unzoo' by clicking, because
** then the current directory will be the one where 'unzoo' is, not the one
** where the archive is. Note that the directory <prefix> must exist,
** 'unzoo' will not create it on demand.
**
** If no <files> argument is given all members are listed or extracted.
** If one or more <files> arguments are given, only members whose names
** match at least one of the <files> patterns are listed or extracted.
** <files> can contain the wildcard '?', which matches any character in
** names, and '*', which matches any number of characters in names. When
** you pass the <files> arguments on the command line you will usually have
** to quote them to keep the shell from trying to expand them.
**
** Usually 'unzoo' will only list or extract the latest generation of each
** member. But if you append ';<nr>' to a path name pattern the generation
** with the number <nr> is listed or extracted. <nr> itself can contain the
** wildcard characters '?' and '*', so appending ';*' to a path name pattern
** causes all generations to be listed or extracted.
**
**
** COMPATIBILITY
**
** 'unzoo' is based heavily on the 'booz' archive extractor by Rahul Dhesi.
** I basically stuffed everything in one file (so no 'Makefile' is needed),
** cleaned it up (so that it is now more portable and a little bit faster),
** and added the support for long file names, directories, and comments.
**
** 'unzoo' differs in some details from 'booz' and the zoo archiver 'zoo'.
**
** 'unzoo' can only list and extract members from archives, like 'booz'.
** 'zoo' can also add members, delete members, etc.
**
** 'unzoo' can extract members as text files, converting from universal text
** format to the local text format, if the '-a' option is given or the '-b'
** option is not given and the member has a comment starting with '!TEXT!'.
** So in the absence of the '-a' option and comments starting with '!TEXT!',
** 'unzoo' behaves like 'zoo' and 'booz', which always extract as binary.
** But 'unzoo' can correctly extract text files from archives that were
** created under UNIX (or other systems using the universal text format) and
** extended with '!TEXT!' comments on systems such as DOS, VMS, Macintosh.
**
** 'unzoo' can handle long names, which it converts in a system dependent
** manner to local names, like 'zoo' (this may not be available on all
** systems). 'booz' always uses the short DOS format names.
**
** 'unzoo' extracts members into subdirectories, which it automatically
** creates, like 'zoo' (this may not be available on all systems). 'booz'
** always extracts all members into the current directory.
**
** 'unzoo' can handle comments and generations in the archive, like 'zoo'.
** 'booz' ignores all comments and generations.
**
** 'unzoo' cannot handle members compressed with the old method, only with
** the new high method or not compressed at all. 'zoo' and 'booz' also
** handle members compress with the old method. This shall be fixed soon.
**
** 'unzoo' can handle archives in binary format under VMS, i.e., it is not
** necessary to convert them to stream linefeed format with 'bilf' first.
** 'zoo' and 'booz' require this conversion.
**
** 'unzoo' is somewhat faster than 'zoo' and 'booz'.
**
** 'unzoo' should be much easier to port than both 'zoo' and 'booz'.
**
** COMPILATION
**
** Under UNIX with the standard C compiler, compile 'unzoo' as follows
** cc -o unzoo -DSYS_IS_UNIX -O unzoo.c
** If your UNIX has the 'mkdir' system call, you may add '-DSYS_HAS_MKDIR'
** for a slightly faster executable. BSD has it, else try 'man 2 mkdir'.
**
** Under DOS with the DJGPP GNU C compiler, compile 'unzoo' as follows
** gcc -o unzoo.out -DSYS_IS_DOS_DJGPP -O2 unzoo.c
** copy /b \djgpp\bin\go32.exe+unzoo.out unzoo.exe
**
** Under TOS with the GNU compiler and unixmode, compile 'unzoo' as follows
** gcc -o unzoo.ttp -DSYS_IS_TOS_GCC -O2 unzoo.c
**
** Under OS/2 2 with the emx development system, compile 'unzoo' as follows
** gcc -o unzoo.exe -DSYS_IS_OS2_EMX -Zomf -Zsys -O2 unzoo.c
** To create an executable that runs under OS/2 and DOS, but which requires
** the emx runtime, compile without the '-Zomf' and '-Zsys' options.
**
** On a VAX running VMS with the DEC C compiler, compile 'unzoo' as follows
** cc unzoo/define=SYS_IS_VMS
** link unzoo
** Then perform the following global symbolic assignment
** unzoo :== $<dev>:[<dir>]unzoo.exe
** where <dir> is the name of the directory where you have installed
** 'unzoo' and <dev> is the device on which this directory is, for example
** unzoo :== $dia1:[progs.archivers]unzoo
** You may want to put this symbolic assignment into your 'login.com' file.
**
** On a Macintosh with the MPW C compiler, compile 'unzoo' as follows
** C -model far -d SYS_IS_MAC_MPW -opt on unzoo.c
** Link -model far -d -c '????' -t APPL unzoo.c.o -o unzoo <continued>
** "{CLibraries}"StdClib.o "{Libraries}"SIOW.o <continued>
** "{Libraries}"Runtime.o "{Libraries}"Interface.o
** Rez -a "{RIncludes}"SIOW.r -o unzoo
** Afterwards choose the 'Get Info' command in the finder 'File' menu and
** increase the amount of memory 'unzoo' gets upon startup to 256 KBytes.
** To create a MPW tool instead of a standalone, link with creator 'MPS '
** instead of '????', with type 'MPST' instead of 'APPL' and with 'Stubs.o'
** instead of 'SIOW.o'. The 'Rez' command is not required for the tool.
** Alternatively choose the 'Create Build Commands...' command from the MPW
** 'Build' menu to create a makefile. Edit it and add '-d SYS_IS_MAC_MPW'
** to the compile command. Choose the 'Build...' command from the 'Build'
** menu to build 'unzoo'.
**
** On other systems with a C compiler, try to compile 'unzoo' as follows
** cc -o unzoo -DSYS_IS_GENERIC -O unzoo.c
**
** PORTING
**
** If this does not work, you must supply new definitions for the macros
** 'OPEN_READ_ARCH', 'OPEN_READ_TEXT' and 'OPEN_WRIT_TEXT'. If you want
** 'unzoo' to keep long file names, you must supply a definition for the
** macro 'CONV_NAME'. If you want 'unzoo' to extract into subdirectories,
** you must supply a definition for the macro 'CONV_DIRE'. If you want
** 'unzoo' to automatically create directories, you must supply a definition
** for the macro 'MAKE_DIR'. If you want 'unzoo' to set the permissions of
** extracted members to those recorded in the archive, you must supply a
** definition for the macro 'SETF_PERM'. Finally if you want 'unzoo' to set
** the times of the extracted members to the times recorded in the archive,
** you must supply a definition for the macro 'SETF_TIME'. Everything else
** should be system independent.
**
** ACKNOWLEDGMENTS
**
** Rahul Dhesi wrote the 'zoo' archiver and the 'booz' archive extractor.
** Haruhiko Okumura wrote the LZH code (originally for his 'ar' archiver).
** David Schwaderer provided the CRC-16 calculation in PC Tech Journal 4/85.
** Jeff Damens wrote the name match code in 'booz' (originally for Kermit).
** Harald Boegeholz ported 'unzoo' to OS/2 with the emx development system.
** Dave Bayer ported 'unzoo' to the Macintosh, including Macbinary support.
**
** HISTORY
*H $Log: unzoo.c,v $
*H Revision 4.4 2000/05/29 08:56:57 sal
*H Remove all the \ continuation lines -- who needs the hassle. SL
*H
*H Revision 4.3 1999/10/27 08:51:11 sal
*H Fix date problem on alphas (I hope) SL
*H
*H Revision 4.2 1999/05/26 09:27:03 gap
*H burkhard: use fseek to access file comments; Mac version: several minor fixes
*H
*H Revision 1.5 1994/01/21 13:32:32 mschoene
*H added Mac support from Dave Bayer
*H
*H Revision 1.4 1994/01/20 20:45:46 mschoene
*H cleaned up determination of write mode
*H
*H Revision 1.3 1993/12/02 12:43:12 mschoene
*H added OS/2 support from Harald Boegeholz
*H
*H Revision 1.2 1993/12/02 12:33:39 mschoene
*H fixed several typos, renamed MS-DOS to DOS
*H
*H Revision 1.1 1993/11/09 07:17:50 mschoene
*H Initial revision
*H
*/
#include <stdio.h>
/****************************************************************************
**
*F OPEN_READ_ARCH(<patl>) . . . . . . . . . . . open an archive for reading
*F CLOS_READ_ARCH() . . . . . . . . . . . . . . . . . . . close an archive
*F BLCK_READ_ARCH(<blk>,<len>) . . . . . . . . read a block from an archive
*F RWND_READ_ARCH() . . . . . . . . . . . reset file read position to start
*F SEEK_READ_ARCH(pos) . . . . . . . . . . . . . . move read position to pos
**
** 'OPEN_READ_ARCH' returns 1 if the archive file with the path name <patl>
** (as specified by the user on the command line) could be opened for
** reading and 0 otherwise. Because archive files are binary files,
** 'OPEN_READ_ARCH' must open the file in binary mode.
**
** 'CLOS_READ_ARCH' closes the archive file opened by 'OPEN_READ_ARCH'
** again.
**
** 'BLCK_READ_ARCH' reads up to <len> characters from the archive file
** opened with 'OPEN_READ_ARCH' into the blkfer <blk>, and returns the
** actual number of characters read.
**
** This operation is operating system dependent because the archive file
** must be opened in binary mode, so that for example no <cr>/<lf> <-> <lf>
** translation happens. You must supply a definition for each new port.
*/
#ifdef SYS_IS_UNIX
FILE * ReadArch;
#define OPEN_READ_ARCH(patl) ((ReadArch = fopen( (patl), "r" )) != 0)
#define CLOS_READ_ARCH() (fclose( ReadArch ) == 0)
#define BLCK_READ_ARCH(blk,len) fread( (blk), 1L, (len), ReadArch )
#define RWND_READ_ARCH() (fseek( ReadArch, 0, 0 ) == 0)
#define SEEK_READ_ARCH(pos) (fseek( ReadArch, pos, SEEK_SET) == 0)
#endif
#ifdef SYS_IS_DOS_DJGPP
FILE * ReadArch;
#define OPEN_READ_ARCH(patl) ((ReadArch = fopen( (patl), "rb" )) != 0)
#define CLOS_READ_ARCH() (fclose( ReadArch ) == 0)
#define BLCK_READ_ARCH(blk,len) fread( (blk), 1L, (len), ReadArch )
#define RWND_READ_ARCH() (fseek( ReadArch, 0, 0 ) == 0)
#endif
#ifdef SYS_IS_OS2_EMX
FILE * ReadArch;
#define OPEN_READ_ARCH(patl) ((ReadArch = fopen( (patl), "rb" )) != 0)
#define CLOS_READ_ARCH() (fclose( ReadArch ) == 0)
#define BLCK_READ_ARCH(blk,len) fread( (blk), 1L, (len), ReadArch )
#define RWND_READ_ARCH() (fseek( ReadArch, 0, 0 ) == 0)
#endif
#ifdef SYS_IS_TOS_GCC
FILE * ReadArch;
#define OPEN_READ_ARCH(patl) ((ReadArch = fopen( (patl), "rb" )) != 0)
#define CLOS_READ_ARCH() (fclose( ReadArch ) == 0)
#define BLCK_READ_ARCH(blk,len) fread( (blk), 1L, (len), ReadArch )
#define RWND_READ_ARCH() (fseek( ReadArch, 0, 0 ) == 0)
#endif
#ifdef SYS_IS_VMS
FILE * ReadArch;
#define OPEN_READ_ARCH(patl) ((ReadArch = fopen( (patl), "r" )) != 0)
#define CLOS_READ_ARCH() (fclose( ReadArch ) == 0)
#define BLCK_READ_ARCH(blk,len) fread( (blk), 1L, (len), ReadArch )
#define RWND_READ_ARCH() (fseek( ReadArch, 0, 0 ) == 0)
#endif
#ifdef SYS_IS_MAC_MPW
FILE * ReadArch;
#define OPEN_READ_ARCH(patl) ((ReadArch = fopen( (patl), "r") ) != 0)
#define BLCK_READ_ARCH(blk,len) fread( (blk), 1L, (len), ReadArch )
#define CLOS_READ_ARCH() (fclose( ReadArch ) == 0)
#define RWND_READ_ARCH() (fseek( ReadArch, 0, 0 ) == 0)
#endif
#ifdef SYS_IS_MAC_THC
#include <SIOUX.h>
FILE * ReadArch;
#define OPEN_READ_ARCH(patl) ((ReadArch = fopen( (patl), "rb") ) != 0)
#define BLCK_READ_ARCH(blk,len) fread( (blk), 1L, (len), ReadArch )
#define CLOS_READ_ARCH() (fclose( ReadArch ) == 0)
#define RWND_READ_ARCH() (fseek( ReadArch, 0, SEEK_SET ) == 0)
#define SEEK_READ_ARCH(pos) (fseek( ReadArch, pos, SEEK_SET) == 0)
#define SYS_IS_MAC_MPW /* BH: use most parts of MPW port */
#endif
#ifdef SYS_IS_GENERIC
FILE * ReadArch;
#define OPEN_READ_ARCH(patl) ((ReadArch = fopen( (patl), "r" )) != 0)
#define CLOS_READ_ARCH() (fclose( ReadArch ) == 0)
#define BLCK_READ_ARCH(blk,len) fread( (blk), 1L, (len), ReadArch )
#define RWND_READ_ARCH() (fseek( ReadArch, 0, 0 ) == 0)
#define SEEK_READ_ARCH(pos) (fseek( ReadArch, pos, SEEK_SET) == 0)
#endif
#ifndef OPEN_READ_ARCH
#include "You_must_specify_the_system.h"
#endif
/****************************************************************************
**
*F OPEN_READ_TEXT(<patl>) . . . . . . . . . . . . . open a file for reading
*F CLOS_READ_TEXT() . . . . . . . . . . . . . . . . . . . . . close a file
*F BLCK_READ_TEXT(<blk>,<len>) . . . . . . . . . . read a block from a file
**
** 'OPEN_READ_TEXT' returns 1 if the file with the path name <patl> (as
** specified by the user on the command line) could be opened for reading
** and 0 otherwise. 'OPEN_READ_TEXT' is used only for text files, so it
** should open the file in text mode.
**
** 'CLOS_READ_TEXT' closes the file opened by 'OPEN_READ_TEXT' again.
**
** 'BLCK_READ_TEXT' reads up to <len> characters from the file opened with
** 'OPEN_READ_TEXT' into the blkfer <blk>, and returns the actual number of
** characters read.
**
** In 'unzoo' these functions are only used to test if a file exists.
**
** This operation is operating system dependent because it may be neccessary
** to translate between the local text format and the UNIX style text format
** usually used in archives. The default is to use 'fopen', 'fread', and
** 'fclose', which should work everywhere according to the ANSI standard.
** You may want to use 'open', 'read', and 'close' for better performance.
*/
#ifndef OPEN_READ_TEXT
FILE * ReadText;
#define OPEN_READ_TEXT(patl) ((ReadText = fopen( (patl), "r" )) != 0)
#define CLOS_READ_TEXT() (fclose( ReadText ) == 0)
#define BLCK_READ_TEXT(blk,len) fread( (blk), 1L, (len), ReadText )
#endif
/****************************************************************************
**
*F OPEN_WRIT_TEXT(<patl>) . . . . . . . . . . . . . open a file for writing
*F CLOS_WRIT_TEXT() . . . . . . . . . . . . . . . . . . . . . close a file
*F BLCK_WRIT_TEXT(<blk>,<len>) . . . . . . . . . . . write a block to a file
**
** 'OPEN_WRIT_TEXT' returns 1 if the file with the path name <patl> (as
** specified by the user on the command line) could be opened for writing
** and 0 otherwise. 'OPEN_WRIT_TEXT' is used only for text files, so it
** must open the file in text mode.
**
** 'CLOS_WRIT_TEXT' closes the file opened by 'OPEN_WRIT_TEXT' again.
**
** 'BLCK_WRIT_TEXT' writes up to <len> characters from <blk> into the file
** opened with 'OPEN_WRIT_TEXT', and returns the actual number of characters
** written.
**
** This operation is operating system dependent because it may be neccessary
** to translate between the UNIX style text format usually used in archives
** and the local text format. The default is to use 'fopen', 'fwrite', and
** 'fclose', which should work everywhere according to the ANSI standard.
** You may want to use 'open', 'write', and 'close' for better performance.
*/
#ifdef SYS_IS_MAC_MPW
#ifndef SYS_IS_MAC_THC
FILE * WritText;
#define OPEN_WRIT_TEXT(patl) MacOpenWritText( (patl) )
#define CLOS_WRIT_TEXT() MacClosWritText()
#define BLCK_WRIT_TEXT(blk,len) MacBlckWritText( (blk), (len) )
#else
FILE * WritText;
#define OPEN_WRIT_TEXT(patl) MacOpenWritText( (patl) )
#define CLOS_WRIT_TEXT() (fclose( WritText ) == 0)
#define BLCK_WRIT_TEXT(blk,len) fwrite( (blk), 1L, (len), WritText )
#endif
#endif
#ifndef OPEN_WRIT_TEXT
FILE * WritText;
#define OPEN_WRIT_TEXT(patl) ((WritText = fopen( (patl), "w" )) != 0)
#define CLOS_WRIT_TEXT() (fclose( WritText ) == 0)
#define BLCK_WRIT_TEXT(blk,len) fwrite( (blk), 1L, (len), WritText )
#endif
/****************************************************************************
**
*F OPEN_READ_BINR(<patl>) . . . . . . . . . . . . . open a file for reading
*F CLOS_READ_BINR() . . . . . . . . . . . . . . . . . . . . . close a file
*F BLCK_READ_BINR(<blk>,<len>) . . . . . . . . . . read a block from a file
**
** 'OPEN_READ_BINR' returns 1 if the file with the path name <patl> (as
** specified by the user on the command line) could be opened for reading
** and 0 otherwise. 'OPEN_READ_BINR' is used only for binary files, so it
** should open the file in binary mode.
**
** 'CLOS_READ_BINR' closes the file opened by 'OPEN_READ_BINR' again.
**
** 'BLCK_READ_BINR' reads up to <len> characters from the file opened with
** 'OPEN_READ_BINR' into the blkfer <blk>, and returns the actual number of
** characters read.
**
** In 'unzoo' these functions are currently not used at all.
**
** This operation is operating system dependent because the file must be
** opened in binary mode, so that for example no <cr>/<lf> <-> <lf>
** translation happens. The default is to use 'fopen' with mode 'rb',
** 'fwrite', and 'fclose', with should work on most systems.
*/
#ifndef OPEN_READ_BINR
FILE * ReadBinr;
#define OPEN_READ_BINR(patl) ((ReadBinr = fopen( (patl), "rb" )) != 0)
#define CLOS_READ_BINR() (fclose( ReadBinr ) == 0)
#define BLCK_READ_BINR(blk,len) fread( (blk), 1L, (len), ReadBinr )
#endif
/****************************************************************************
**
*F OPEN_WRIT_BINR(<patl>) . . . . . . . . . . . . . open a file for writing
*F CLOS_WRIT_BINR() . . . . . . . . . . . . . . . . . . . . . close a file
*F BLCK_WRIT_BINR(<blk>,<len>) . . . . . . . . . . . write a block to a file
**
** 'OPEN_WRIT_BINR' returns 1 if the file with the path name <patl> (as
** specified by the user on the command line) could be opened for writing
** and 0 otherwise. 'OPEN_WRIT_BINR' is used only for binary files, so it
** must open the file in binary mode.
**
** 'CLOS_WRIT_BINR' closes the file opened by 'OPEN_WRIT_BINR' again.
**
** 'BLCK_WRIT_BINR' writes up to <len> characters from <blk> into the file
** opened with 'OPEN_WRIT_BINR', and returns the actual number of characters
** written.
**
** This operation is operating system dependent because the file must be
** opened in binary mode, so that for example no <cr>/<lf> <-> <lf>
** translation happens. The default is to use 'fopen' with mode 'wb',
** 'fwrite', and 'fclose', with should work on most systems. You must
** supply a definition is this does not work and you want 'unzoo' to extract
** binary files.
*/
#ifdef SYS_IS_VMS
#include <file.h>
long WritBinr;
#define OPEN_WRIT_BINR(patl) ((WritBinr = creat( (patl), 0, "rfm=fix", "mrs=512" )) != -1)
#define BLCK_WRIT_BINR(blk,len) VmsBlckWritBinr( WritBinr, (blk), (len) )
#define CLOS_WRIT_BINR() (close( WritBinr ) == 0)
#endif
#ifdef SYS_IS_MAC_THC
FILE * WritBinr;
#define OPEN_WRIT_BINR(patl) MacOpenWritBinr (patl)
#define BLCK_WRIT_BINR(blk,len) fwrite( (blk), 1L, (len), WritBinr )
#define CLOS_WRIT_BINR() (fclose( WritBinr ) == 0)
#endif
#ifndef OPEN_WRIT_BINR
FILE * WritBinr;
#define OPEN_WRIT_BINR(patl) ((WritBinr = fopen( (patl), "wb" )) != 0)
#define BLCK_WRIT_BINR(blk,len) fwrite( (blk), 1L, (len), WritBinr )
#define CLOS_WRIT_BINR() (fclose( WritBinr ) == 0)
#endif
/****************************************************************************
**
*F CONV_NAME(<naml>,<namu>) . . . . . . . . . . . . . . convert a file name
**
** 'CONV_NAME' returns in <naml> the universal file name <namu> converted
** to the local format. <namu> may contain uppercase, lowercase, and all
** special characters, and may be up to 255 characters long.
**
** You must define this for a new port if you want 'unzoo' to keep the long
** names instead of using the default local format for the file names, which
** contains up to eight lowercase characters before an optional dot ('.'),
** up to three characters after the dot, and no special characters. You may
** want to use the universal conversion function 'ConvName'.
*/
#ifdef SYS_IS_UNIX
#define CONV_NAME(naml,namu) strcpy( (naml), (namu) )
#endif
#ifdef SYS_IS_DOS_DJGPP
#define CONV_NAME(naml,namu) ConvName( (naml), (namu), 8L, 3L, '_' )
#endif
#ifdef SYS_IS_OS2_EMX
#define CONV_NAME(naml,namu) strcpy( (naml), (namu) )
#endif
#ifdef SYS_IS_TOS_GCC
#define CONV_NAME(naml,namu) strcpy( (naml), (namu) )
#endif
#ifdef SYS_IS_VMS
#define CONV_NAME(naml,namu) ConvName( (naml), (namu), 39L, 39L, '_' )
#endif
#ifdef SYS_IS_MAC_MPW
#define CONV_NAME(naml,namu) strncpy( (naml), (namu), 31 ); naml[32] = '\0'
#endif
#ifndef CONV_NAME
#define CONV_NAME(naml,namu) ConvName( (naml), (namu), 8L, 3L, 'x' )
#endif
/****************************************************************************
**
*F CONV_DIRE(<dirl>,<diru>) . . . . . . . . . . . convert a directory name
**
** 'CONV_DIRE' returns in <dirl> the universal directory name <diru>
** converted to the local format. <diru> contains an arbitrary number of
** components separated by slashes ('/'), where each component may contain
** uppercase, lowercase, and all special characters, and may be up to 255
** characters long.
**
** You must define this for a new port if you want 'unzoo' to extract
** members into subdirectories, instead of extracting them to the current
** directory. You may want to use the universal conversion function
** 'ConvDire'.
*/
#ifdef SYS_IS_UNIX
#define CONV_DIRE(dirl,diru) ConvDire((dirl),(diru),"/","/","","/","/")
#endif
#ifdef SYS_IS_DOS_DJGPP
#define CONV_DIRE(dirl,diru) ConvDire((dirl),(diru),"\\","\\","","\\","\\")
#endif
#ifdef SYS_IS_OS2_EMX
#define CONV_DIRE(dirl,diru) ConvDire((dirl),(diru),"/","/","","/","/")
#endif
#ifdef SYS_IS_TOS_GCC
#define CONV_DIRE(dirl,diru) ConvDire((dirl),(diru),"\\","\\","","\\","\\")
#endif
#ifdef SYS_IS_VMS
#define CONV_DIRE(dirl,diru) ConvDire((dirl),(diru),"[]","[","[.",".","]")
#endif
#ifdef SYS_IS_MAC_MPW
#define CONV_DIRE(dirl,diru) ConvDire((dirl),(diru),"","",":",":",":")
#endif
#ifndef CONV_DIRE
#define CONV_DIRE(dirl,diru) ((dirl)[0]='\0',1)
#endif
/****************************************************************************
**
*F MAKE_DIRE(<patl>) . . . . . . . . . . . . . . . . . . . make a directory
**
** 'MAKE_DIRE' makes the directory with the local path name <patl> (as
** converted by 'CONV_NAME' and 'CONV_DIRE' with the prefix of 'MakeDirs').
**
** You must define this for a new port if you want 'unzoo' to automatically
** create directories instead of requiring the user to create them.
*/
#ifdef SYS_IS_UNIX
#ifdef SYS_HAS_MKDIR
#define MAKE_DIRE(patl) mkdir( (patl), 0777L )
#else
char Cmd [256];
#define MAKE_DIRE(patl) (sprintf(Cmd,"/bin/mkdir %s",(patl)),!system(Cmd))
#endif
#endif
#ifdef SYS_IS_DOS_DJGPP
#define MAKE_DIRE(patl) mkdir( (patl), 0777L )
#endif
#ifdef SYS_IS_OS2_EMX
#include <stdlib.h>
#define MAKE_DIRE(patl) mkdir( (patl), 0777L )
#endif
#ifdef SYS_IS_TOS_GCC
#define MAKE_DIRE(patl) mkdir( (patl), 0777L )
#endif
#ifdef SYS_IS_VMS
#define MAKE_DIRE(patl) VmsMakeDire( (patl) )
#endif
#ifdef SYS_IS_MAC_MPW
#define MAKE_DIRE(patl) MacMakeDire( (patl) )
#endif
/****************************************************************************
**
*F SETF_TIME(<patl>,<secs>) . . . . . . . . . . . change the time of a file
**
** 'SETF_TIME' changes the time of the file with the local path name <patl>
** (as converted by 'CONV_NAME' and 'CONV_DIRE') to <secs>, which is the
** number of seconds since 1970/01/01 00:00:00.
**
** You must define this for a new port if you want 'unzoo' to extract
** members with the correct time as stored in the archive.
*/
#ifdef SYS_IS_UNIX
unsigned int Secs [2];
#define SETF_TIME(patl,secs) (Secs[0]=Secs[1]=(secs),!utime((patl),Secs))
#endif
#ifdef SYS_IS_DOS_DJGPP
unsigned long Secs [2];
#define SETF_TIME(patl,secs) (Secs[0]=Secs[1]=(secs),!utime((patl),Secs))
#endif
#ifdef SYS_IS_OS2_EMX
#include <sys/utime.h>
struct utimbuf Secs;
#define SETF_TIME(patl,secs) (Secs.actime=Secs.modtime=(secs),!utime((patl),&Secs))
#endif
#ifdef SYS_IS_TOS_GCC
unsigned long Secs [2];
#define SETF_TIME(patl,secs) (Secs[0]=Secs[1]=(secs),!utime((patl),Secs))
#endif
#ifndef SETF_TIME
#define SETF_TIME(patl,secs) (1)
#endif
/****************************************************************************
**
*F SETF_PERM(<patl>,<mode>) . . . . . . . change the permissions of a file
**
** 'SETF_PERM' changes the permissions of the file with the local path name
** <patl> (as converted by 'CONV_NAME' and 'CONV_DIRE') to <mode>, which is
** a UNIX style mode word.
**
** You must define this for a new port if you want 'unzoo' to extract
** members with the permissions stored in the archive.
*/
#ifdef SYS_IS_UNIX
#define SETF_PERM(patl,mode) (!chmod((patl),(int)(mode)))
#endif
#ifdef SYS_IS_DOS_DJGPP
#define SETF_PERM(patl,mode) (!chmod((patl),(int)(mode)))
#endif
#ifdef SYS_IS_OS2_EMX
#include <io.h>
#define SETF_PERM(patl,mode) (!chmod((patl),(int)(mode)))
#endif
#ifdef SYS_IS_TOS_GCC
#define SETF_PERM(patl,mode) (!chmod((patl),(int)(mode)))
#endif
#ifndef SETF_PERM
#define SETF_PERM(patl,mode) (1)
#endif
/****************************************************************************
**
*F ConvName(...) . . . . . . . . . . . . convert a file name to local format
**
** 'ConvName( <naml>, <namu>, <pre>,<pst>,<rpl> )'
**
** 'ConvName' returns in <naml> the universal file name <namu> converted to
** the local format described by <pre>, <pst>, and <rpl>.
**
** <pre> is the maximum number of characters before the optional dot, <pst>
** is the maximum number of characters after the optional dot, and <rpl> is
** the character that replaces special characters.
*/
int ConvName ( naml, namu, pre, pst, rpl )
char * naml;
char * namu;
unsigned long pre;
unsigned long pst;
char rpl;
{
char * dotu; /* position of last dot in <namu> */
char * l; /* loop variable */
char * u; /* loop variable */
/* find the final dot */
dotu = 0;
for ( u = namu; *u != '\0'; u++ )
if ( *u == '.' )
dotu = u;
if ( dotu == 0 ) dotu = u;
/* copy the first part */
l = naml;
for ( u = namu; u < dotu && u < namu+pre; u++ ) {
if ( 'a' <= *u && *u <= 'z' ) *l++ = *u;
else if ( 'A' <= *u && *u <= 'Z' ) *l++ = *u - 'A' + 'a';
else if ( '0' <= *u && *u <= '9' ) *l++ = *u;
else *l++ = rpl;
}
/* the part before the dot may not be empty */
if ( l == naml )
*l++ = rpl;
/* if the universal file name had no dot, thats it */
if ( *dotu == '\0' || pst == 0 ) {
*l = '\0';
return 1;
}
/* copy the dot */
*l++ = '.';
/* copy the remaining part */
for ( u = dotu+1; *u && u < dotu+1+pst; u++ ) {
if ( 'a' <= *u && *u <= 'z' ) *l++ = *u;
else if ( 'A' <= *u && *u <= 'Z' ) *l++ = *u - 'A' + 'a';
else if ( '0' <= *u && *u <= '9' ) *l++ = *u;
else *l++ = rpl;
}
/* terminate the local name and indicate success */
*l = '\0';
return 1;
}
/****************************************************************************
**
*F ConvDire(...) . . . . . . . . . convert a directory name to local format
**
** 'ConvDire( <dirl>, <diru>, <root>,<abs>,<rel>,<sep>,<end> )'
**
** 'ConvDire' returns in <dirl> the universal directory name <diru>
** converted to the local format. <diru> contains an arbitrary number of
** components separated by slashes ('/'), where each component may contain
** uppercase, lowercase, and all special characters, and may be up to 255
** characters long.
**
** <root> is the string that is used for the root directory in local format.
** <abs> is the string that starts absolute directory names in local format,
** <rel> starts relative names, directory components are separated by <sep>,
** and <end> separates the directory part and a proper file name.
**
** If <diru> is the empty string, then 'ConvDire' returns in <dirl> also the
** empty string, instead of '<rel><end>'.
*/
int ConvDire ( dirl, diru, root, abs, rel, sep, end )
char * dirl;
char * diru;
char * root;
char * abs;
char * rel;
char * sep;
char * end;
{
char namu [256]; /* file name part, univ. */
char naml [256]; /* file name part, local */
char * d; /* loop variable */
char * s; /* loop variable */
/* special case for the root directory */
if ( *diru == '/' && diru[1] == '\0' ) {
for ( s = root; *s != '\0'; s++ ) *dirl++ = *s;
*dirl = '\0';
return 1;
}
/* start the file name with <abs> or <rel> */
d = diru;
if ( *diru == '/' )
for ( d++, s = abs; *s != '\0'; s++ ) *dirl++ = *s;
else if ( *diru != '\0' )
for ( s = rel; *s != '\0'; s++ ) *dirl++ = *s;
/* add the components of the directory part separated by <sep> */
while ( *d != '\0' ) {
s = namu;
while ( *d != '\0' && *d != '/' ) *s++ = *d++;
*s = '\0';
CONV_NAME( naml, namu );
for ( s = naml; *s != '\0'; s++ ) *dirl++ = *s;
if ( *d == '/' )
for ( d++, s = sep; *s != '\0'; s++ ) *dirl++ = *s;
}
/* add the divisor <end> */
if ( *diru != '\0' )
for ( s = end; *s != '\0'; s++ ) *dirl++ = *s;
/* terminate the file name and indicate success */
*dirl = '\0';
return 1;
}
/****************************************************************************
**
*F VmsBlckWritBinr(<blk>,<len>) . write a block to a binary file under VMS
*F VmsMakeDire(<patl>) . . . . . . . . . . . . create a directory under VMS
**
** 'VmsBlckWritBinr' writes the block <blk> of length <len> to the file
** opened with 'OPEN_WRIT_BINR'.
**
** 'VmsMakeDire' creates a directory under VMS. It has to change the path
** name from '[<components>]<dirl>' to '[<components>.<dirl>]'.
*/
#ifdef SYS_IS_VMS
unsigned long VmsBlckWritBinr ( blk, len )
unsigned char * blk;
unsigned long len;
{
unsigned char buf [512]; /* local buffer (padded with 0) */
long i, k, l; /* loop variables */
/* write the full 512 byte blocks */
for ( i = 0; i+512 < len; i += 512 ) {
if ( (l = write( WritBinr, blk+i, 512 )) != 512 )
return i + l;
}
/* write an incomplete last block padded with 0 */
for ( k = 0; k < 512; k++ )
buf[k] = (i+k < len ? blk[i+k] : 0);
if ( (l = write( WritBinr, buf, 512 )) != 512 )
return i + l;
/* indicate success */
return len;
}
int VmsMakeDire ( patl )
char * patl;
{
char * p;
/* replace the separator with a dot */
for ( p = patl; *p != '\0' && *p != ']'; p++ ) ;
if ( *p == ']' ) *p = '.';
/* append another separator */
for ( ; *p != '\0'; p++ ) ;
*p++ = ']';
*p = '\0';
/* make the directory and indicate success */
return mkdir( patl, 0 );
}
#endif
/****************************************************************************
**
*F MacOpenWritText(<patl>) . . . . . open a text file for writing under MPW
*F MacClosWritText() . . . . . . . . . . . . . . close a text file under MPW
*F MacBlckWritText(<blk>,<len>) . . write a block to a text file under MPW
*F OPEN_WRIT_MACB(<patl>) . . . open a MacBinary file for writing under MPW
*F CLOS_WRIT_MACB() . . . . . . . . . . . close a MacBinary file under MPW
*F BLCK_WRIT_MACB(<blk>,<len>) . write a block to a MacBinary file under MPW
*F MacMakeDire(<patl>) . . . . . . . . . . . . create a directory under MPW
**
** 'MacBlckWritText' writes the block <blk> of length <len> to the text file
** opened with 'OPEN_WRIT_TEXT'. It converts <lf> ('\012') characters,
** which represent <newline> in universal text format, to '\n' characters,
** which represent <newline> in the system defined text format.
**
** 'MacMakeDire' creates the directory with local path name <patl>. The
** code comes from the Macintosh 'tar' port by Gail Zacharias.
*/
#ifdef SYS_IS_MAC_MPW
#include <Devices.h>
#include <Files.h>
#ifdef SYS_IS_MAC_THC
int MacOpenWritText ( patl )
char * patl;
{
FileParam fndrInfo;
char patp [256]; /* <patl> as a Pascal string */
int len; /* length of <patp> */
/* open the file */
if ( ! (WritText = fopen( (patl), "w" )) )
return 0;
/* convert <patl> from a C string to a Pascal string */
len = strlen( patl );
len = len < 256 ? len : 255;
patp[0] = len;
strncpy( patp+1, patl, len );
/* set the file type to 'TEXT' and the creator to TeachText */
fndrInfo.ioNamePtr = (unsigned char*)patp;
fndrInfo.ioVRefNum = 0;
fndrInfo.ioFVersNum = 0;
fndrInfo.ioFDirIndex = 0;
if ( PBGetFInfo( (ParmBlkPtr)&fndrInfo, 0 ) ) {
return 0;
}
fndrInfo.ioFlFndrInfo.fdType = 'TEXT';
fndrInfo.ioFlFndrInfo.fdCreator = 'ttxt';
if ( PBSetFInfo( (ParmBlkPtr)&fndrInfo, 0 ) ) {
return 0;
}
/* indicate success */
return 1;
}
int MacOpenWritBinr ( patl )
char * patl;
{
FileParam fndrInfo;
char patp [256]; /* <patl> as a Pascal string */
int len; /* length of <patp> */
/* open the file */
if ( ! (WritBinr = fopen( (patl), "wb" )) )
return 0;
/* convert <patl> from a C string to a Pascal string */
len = strlen( patl );
len = len < 256 ? len : 255;
patp[0] = len;
strncpy( patp+1, patl, len );
/* set the file type and creator */
fndrInfo.ioNamePtr = (unsigned char*)patp;
fndrInfo.ioVRefNum = 0;
fndrInfo.ioFVersNum = 0;
fndrInfo.ioFDirIndex = 0;
if ( PBGetFInfo( (ParmBlkPtr)&fndrInfo, 0 ) ) {
return 0;
}
fndrInfo.ioFlFndrInfo.fdType = 'BINA';
fndrInfo.ioFlFndrInfo.fdCreator = '????';
if ( PBSetFInfo( (ParmBlkPtr)&fndrInfo, 0 ) ) {
return 0;
}
/* indicate success */
return 1;
}
#endif
#ifndef SYS_IS_MAC_THC
int MacOpenWritText ( patl )
char * patl;
{
FInfo fndrInfo;
/* open the file */
if ( ! (WritText = fopen( (patl), "w" )) )
return 0;
/* set the file type to 'TEXT' and the creator to TeachText */
getfinfo( patl, 0, &fndrInfo );
if ( fndrInfo.fdType == 0 )
fndrInfo.fdType = 'TEXT';
if ( fndrInfo.fdCreator == 0 )
fndrInfo.fdCreator = 'ttxt';
setfinfo( patl, 0, &fndrInfo );
/* indicate success */
return 1;
}
#endif
int MacClosWritText ()
{
return (fclose( WritText ) == 0);
}
unsigned long MacBlckWritText ( blk, len )
unsigned char * blk;
unsigned long len;
{
unsigned long i; /* loop variable */
for ( i = 0; i < len; i++ ) {
if (fputc( (blk[i] != '\012' ? blk[i] : '\n'), WritText ) == EOF)
return i;
}
return len;
}
char WritName [256]; /* name of the file */
IOParam WritIOPB; /* IO parameter block */
FileParam WritFIPB; /* Finder Info parameter block */
unsigned long WritPart; /* current part of MacBinary file */
unsigned long WritType; /* type of file, e.g. 'TEXT' */
unsigned long WritCrtr; /* creator of file, e.g. 'ttxt' */
unsigned long WritFlgs; /* finder flags */
unsigned long WritCDat; /* creation date of file */
unsigned long WritMDat; /* last modification date of file */
unsigned long WritLDat; /* nr. of bytes left in data fork */
unsigned long WritLRsc; /* nr. of bytes left in resource */
int OPEN_WRIT_MACB ( patl )
char * patl;
{
unsigned long i; /* loop variable */
/* find the last semicolon */
for ( i = strlen(patl); 0 < i && patl[i] != ':'; i-- )
;
/* copy the directory part to 'WritName' */
WritName[0] = (0 < i ? i+1 : 0);
for ( i = 1; i <= WritName[0]; i++ )
WritName[i] = patl[i-1];
/* indicate success */
WritPart = 0;
return 1;
}
int CLOS_WRIT_MACB ()
{
/* first get the current settings */
#ifdef SYS_IS_MAC_THC
WritFIPB.ioNamePtr = (StringPtr)WritName;
#else
WritFIPB.ioNamePtr = WritName;
#endif
WritFIPB.ioVRefNum = 0;
WritFIPB.ioFVersNum = 0;
WritFIPB.ioFDirIndex = 0;
if ( PBGetFInfo( (ParmBlkPtr)&WritFIPB, 0 ) ) {
return 0;
}
/* now set some fields to the values found in the MacBinary header */
WritFIPB.ioFlFndrInfo.fdType = WritType;
WritFIPB.ioFlFndrInfo.fdCreator = WritCrtr;
WritFIPB.ioFlFndrInfo.fdFlags = WritFlgs;
WritFIPB.ioFlCrDat = WritCDat;
WritFIPB.ioFlMdDat = WritMDat;
if ( PBSetFInfo( (ParmBlkPtr)&WritFIPB, 0 ) ) {
return 0;
}
/* indicate success */
return 1;
}
unsigned long BLCK_WRIT_MACB ( blk, len )
unsigned char * blk;
unsigned long len;
{
unsigned long cnt; /* number of bytes written */
unsigned long i; /* loop variable */
/* first comes the header (128 bytes long) */
cnt = 0;
if ( WritPart == 0 ) {
for ( i = 1; i <= blk[1]; i++ )
WritName[WritName[0]+i] = blk[i+1];
WritName[0] += blk[1];
WritType = (blk[65]<<24) + (blk[66]<<16) + (blk[67]<< 8) + (blk[68]);
WritCrtr = (blk[69]<<24) + (blk[70]<<16) + (blk[71]<< 8) + (blk[72]);
WritFlgs = (blk[73]<< 8) + 0;
WritLDat = (blk[83]<<24) + (blk[84]<<16) + (blk[85]<< 8) + (blk[86]);
WritLRsc = (blk[87]<<24) + (blk[88]<<16) + (blk[89]<< 8) + (blk[90]);
WritCDat = (blk[91]<<24) + (blk[92]<<16) + (blk[93]<< 8) + (blk[94]);
WritMDat = (blk[95]<<24) + (blk[96]<<16) + (blk[97]<< 8) + (blk[98]);
cnt += 128;
WritPart = 1;
}
/* open the data fork */
if ( WritPart == 1 && cnt < len ) {
#ifdef SYS_IS_MAC_THC
WritFIPB.ioNamePtr = (StringPtr)WritName;
#else
WritFIPB.ioNamePtr = WritName;
#endif
WritIOPB.ioVRefNum = 0;
WritIOPB.ioVersNum = 0;
WritIOPB.ioPermssn = fsWrPerm;
WritIOPB.ioMisc = 0;
WritIOPB.ioRefNum = 0;
if ( PBCreate( (ParmBlkPtr)&WritIOPB, 0 ) ) {
return cnt;
}
if ( PBOpenSync( (ParmBlkPtr)&WritIOPB ) ) {
return cnt;
}
WritPart = 2;
}
/* next comes the data fork (padded to a multiple of 128 bytes) */
if ( WritPart == 2 ) {
while ( WritLDat != 0 && cnt < len ) {
WritIOPB.ioReqCount = (128 <= WritLDat ? 128 : WritLDat);
WritIOPB.ioPosMode = fsAtMark;
WritIOPB.ioPosOffset = 0;
WritIOPB.ioBuffer = (Ptr) (blk + cnt);
if ( PBWriteSync( (ParmBlkPtr)&WritIOPB )
|| WritIOPB.ioActCount != WritIOPB.ioReqCount ) {
PBCloseSync( (ParmBlkPtr)&WritIOPB );
return cnt;
}
cnt += 128;
WritLDat -= WritIOPB.ioReqCount;
}
if ( WritLDat == 0 ) WritPart = 3;
}
/* close the data fork */
if ( WritPart == 3 ) {
PBCloseSync( (ParmBlkPtr)&WritIOPB );
WritPart = 4;
}
/* open the resource fork */
if ( WritPart == 4 && cnt < len ) {
if ( PBOpenRF( (ParmBlkPtr)&WritIOPB, 0 ) ) {
return cnt;
}
WritPart = 5;
}
/* and finally comes the resource fork */
if ( WritPart == 5 ) {
while ( WritLRsc != 0 && cnt < len ) {
WritIOPB.ioReqCount = (128 <= WritLRsc ? 128 : WritLRsc);
WritIOPB.ioPosMode = fsAtMark;
WritIOPB.ioPosOffset = 0;
WritIOPB.ioBuffer = (Ptr) (blk + cnt);
if ( PBWriteSync( (ParmBlkPtr)&WritIOPB )
|| WritIOPB.ioActCount != WritIOPB.ioReqCount ) {
PBCloseSync( (ParmBlkPtr)&WritIOPB );
return cnt;
}
cnt += 128;
WritLRsc -= WritIOPB.ioReqCount;
}
if ( WritLRsc == 0 ) WritPart = 6;
}
/* close the resource fork */
if ( WritPart == 6 ) {
PBCloseSync( (ParmBlkPtr)&WritIOPB );
WritPart = 7;
}
/* indicate success */
return cnt;
}
int MacMakeDire ( patl )
char * patl;
{
HFileParam request; /* structure describing request */
char patp [256]; /* <patl> as a Pascal string */
int len; /* length of <patp> */
/* convert <patl> from a C string to a Pascal string */
len = strlen( patl );
len = len < 256 ? len : 255;
patp[0] = len;
strncpy( patp+1, patl, len );
/* set up the request */
request.ioNamePtr = (unsigned char*)patp;
request.ioVRefNum = 0;
request.ioDirID = 0;
if (noErr == PBDirCreate( (HParmBlkPtr)&request, 0 ))
/* return result */
return (request.ioResult == 0);
else
return 0;
}
#endif
/****************************************************************************
**
*F MakeDirs(<pre>,<patu>) . . . . . . . . . . . . . . make all directories
**
** 'MakeDirs' tries to make all the directories along the universal path
** name <patu> (i.e., with components separated by '/'). <pre> is a prefix
** that is prepended to all path names.
*/
#ifdef MAKE_DIRE
int MakeDirs ( pre, patu )
char * pre;
char * patu;
{
char patl [1024]; /* path name, local */
char diru [256]; /* directory part of <patu>, univ. */
char dirl [256]; /* directory part of <patl>, local */
char namu [256]; /* file name part of <patu>, univ. */
char naml [256]; /* file name part of <patl>, local */
char * d, * n; /* loop variables */
/* if <patu> is an absolute path, copy the slash '/' */
d = diru;
if ( *patu == '/' ) *d++ = *patu++;
while ( *patu != '\0' ) {
/* copy the file name part of <patu> into <namu> */
for ( n = namu; *patu != '\0' && *patu != '/'; ) *n++ = *patu++;
if ( *patu != '\0' ) patu++;
/* convert the name into local format and make the directory */
*d = '\0'; *n = '\0';
CONV_DIRE( dirl, diru );
CONV_NAME( naml, namu );
strcpy( patl, pre );
strcat( patl, dirl );
strcat( patl, naml );
/*N 1993/11/03 martin what should I do with the return code? */
/*N 1993/11/03 martin it could be 0 if the directory exists! */
MAKE_DIRE( patl );
/* append the file name part to the directory part */
if ( d != diru && d[-1] != '/' ) *d++ = '/';
for ( n = namu; *n != '\0'; ) *d++ = *n++;
}
/* indicate success */
return 1;
}
#endif
/****************************************************************************
**
*F IsMatchName(<pat>,<str>) . . test if a string matches a wildcard pattern
**
** 'IsMatchName' return 1 if the pattern <pat> matches the string <str> and
** 0 otherwise. A '?' in <pat> matches any character in <str>, a '*'
** matches any string in <str>, other characters in <pat> match the same
** character in <str>. Characters for which 'IsSpec[<ch>]' is true will not
** be matched by '?' and '*'.
**
** Jeff Damens wrote the name match code in 'booz' (originally for Kermit).
*/
int IsSpec [256]; /* nonzero for special characters */
int IsMatchName ( pat, str )
char * pat; /* pattern to match against */
char * str; /* string to match */
{
char * pos = 0; /* pos. after last '*' in pattern */
char * tmp = 0; /* corresponding match in string */
/* try to match the name part */
while ( *pat != '\0' || *str != '\0' ) {
if ( *pat==*str ) { pat++; str++; }
else if ( *pat=='?' && ! IsSpec[*str] ) { pat++; str++; }
else if ( *pat=='?' && *str != '\0' ) { pat++; str++; }
else if ( *pat=='*' ) { pos = ++pat; tmp = str; }
else if ( tmp != 0 && ! IsSpec[*tmp] ) { pat = pos; str = ++tmp; }
else break;
}
return *pat == '\0' && *str == '\0';
}
/****************************************************************************
**
*F OpenReadArch(<patl>) . . . . . . . . . . . . . . try to open the archive
*F ClosReadArch() . . . . . . . . . . . . . . . . . . . . close the archive
*F GotoReadArch(<pos>) . . . . . . goto an absolute position in the archive
*F ByteReadArch() . . . . . . . . . read a 8 bit unsigned from the archive
*F HalfReadArch() . . . . . . . . . read a 16 bit unsigned from the archive
*F TripReadArch() . . . . . . . . . read a 24 bit unsigned from the archive
*F WordReadArch() . . . . . . . . . read a 32 bit unsigned from the archive
*F BlckReadArch(<blk>,<len>) . . . . read a block of bytes from the archive
*V Descript . . . . . . . . . . . . . . . . . . . . header from the archive
*F DescReadArch() . . . . . . . . . . . . read the header from the archive
*V Entry . . . . . . . . . . . . . . . . header of a member from the archive
*F EntrReadArch() . . . . . . read the header of a member from the archive
**
** 'OpenReadArch' tries to open the archive with local path name <patl> (as
** specified by the user on the command line) for reading and returns 1 to
** indicate success or 0 to indicate that the file cannot be opened.
**
** 'ClosReadArch' closes the archive again.
**
** 'GotoReadArch' positions the archive at the position <pos>, i.e., the
** next call to 'ByteReadArch' will return the byte at position <pos>. Note
** that 'GotoReadArch' does not use 'fseek', because 'fseek' is unreliable.
**
** 'ByteReadArch' returns the next byte unsigned 8 bit from the archive.
** 'HalfReadArch' returns the next 2 bytes unsigned 16 bit from the archive.
** 'TripReadArch' returns the next 3 bytes unsigned 24 bit from the archive.
** 'WordReadArch' returns the next 4 bytes unsigned 32 bit from the archive.
** 'BlckReadArch' reads <len> bytes into the buffer <blk>.
**
** 'Descript' is the description of the archive.
**
** 'DescReadArch' reads the description of the archive that starts at the
** current position into the structure 'Descript'. It should of course only
** be called at the start of the archive file.
**
** 'Entry' is the directory entry of the current member from the archive.
**
** 'EntrReadArch' reads the directory entry of a member that starts at the
** current position into the structure 'Entry'.
*/
unsigned char BufArch [64+4096]; /* buffer for the archive */
unsigned char * PtrArch; /* pointer to the next byte */
unsigned char * EndArch; /* pointer to the last byte */
unsigned long PosArch; /* position of 'BufArch[0]' */
int OpenReadArch ( patl )
char * patl;
{
PtrArch = EndArch = (BufArch+64);
PosArch = 0;
return OPEN_READ_ARCH( patl );
}
int ClosReadArch ()
{
return CLOS_READ_ARCH();
}
int FillReadArch ()
{
unsigned char * s; /* loop variable */
unsigned char * d; /* loop variable */
/* copy the last characters to the beginning (for short backward seeks)*/
d = BufArch;
for ( s = EndArch-64; s < EndArch; s++ )
*d++ = *s;
PosArch += EndArch - (BufArch+64);
/* read a block */
PtrArch = BufArch+64;
EndArch = PtrArch + BLCK_READ_ARCH( PtrArch, 4096 );
/* return the first character */
return (PtrArch < EndArch ? *PtrArch++ : EOF);
}
int GotoReadArch ( pos )
unsigned long pos;
{
/* for long backward seeks goto the beginning of the file */
if ( pos+64 < PosArch ) {
#ifdef SEEK_READ_ARCH
if (!SEEK_READ_ARCH(pos))
return 0;
PtrArch = EndArch = BufArch+64;
PosArch = pos;
#else
if ( ! RWND_READ_ARCH() )
return 0;
PtrArch = EndArch = BufArch+64;
PosArch = 0;
#endif
}
/* jump forward bufferwise */
while ( PosArch + (EndArch - (BufArch+64)) <= pos ) {
if ( FillReadArch() == EOF )
return 0;
}
/* and goto the position (which is now in the buffer) */
PtrArch = (BufArch+64) + (pos - PosArch);
/* indicate success */
return 1;
}
#define ByteReadArch() (PtrArch<EndArch?*PtrArch++:FillReadArch())
unsigned long HalfReadArch ()
{
unsigned long result;
result = ((unsigned long)ByteReadArch());
result += ((unsigned long)ByteReadArch()) << 8;
return result;
}
unsigned long FlahReadArch ()
{
unsigned long result;
result = ((unsigned long)ByteReadArch()) << 8;
result += ((unsigned long)ByteReadArch());
return result;
}
unsigned long TripReadArch ()
{
unsigned long result;
result = ((unsigned long)ByteReadArch());
result += ((unsigned long)ByteReadArch()) << 8;
result += ((unsigned long)ByteReadArch()) << 16;
return result;
}
unsigned long WordReadArch ()
{
unsigned long result;
result = ((unsigned long)ByteReadArch());
result += ((unsigned long)ByteReadArch()) << 8;
result += ((unsigned long)ByteReadArch()) << 16;
result += ((unsigned long)ByteReadArch()) << 24;
return result;
}
unsigned long BlckReadArch ( blk, len )
char * blk;
unsigned long len;
{
int ch; /* character read */
unsigned long i; /* loop variable */
for ( i = 0; i < len; i++ ) {
if ( (ch = ByteReadArch()) == EOF )
return i;
else
*blk++ = ch;
}
return len;
}
struct {
char text[20]; /* "ZOO 2.10 Archive.<ctr>Z" */
unsigned long magic; /* magic word 0xfdc4a7dc */
unsigned long posent; /* position of first directory ent.*/
unsigned long klhvmh; /* two's complement of posent */
unsigned char majver; /* major version needed to extract */
unsigned char minver; /* minor version needed to extract */
unsigned char type; /* type of current member (0,1) */
unsigned long poscmt; /* position of comment, 0 if none */
unsigned short sizcmt; /* length of comment, 0 if none */
unsigned char modgen; /* gens. on, gen. limit */
/* the following are not in the archive file and are computed */
unsigned long sizorg; /* uncompressed size of members */
unsigned long siznow; /* compressed size of members */
unsigned long number; /* number of members */
} Descript;
int DescReadArch ()
{
/* read the text at the beginning */
BlckReadArch(Descript.text,20L); Descript.text[20] = '\0';
/* try to read the magic words */
if ( (Descript.magic = WordReadArch()) != (unsigned long)0xfdc4a7dcL )
return 0;
/* read the old part of the description */
Descript.posent = WordReadArch();
Descript.klhvmh = WordReadArch();
Descript.majver = ByteReadArch();
Descript.minver = ByteReadArch();
/* read the new part of the description if present */
Descript.type = (34 < Descript.posent ? ByteReadArch() : 0);
Descript.poscmt = (34 < Descript.posent ? WordReadArch() : 0);
Descript.sizcmt = (34 < Descript.posent ? HalfReadArch() : 0);
Descript.modgen = (34 < Descript.posent ? ByteReadArch() : 0);
/* initialize the fake entries */
Descript.sizorg = 0;
Descript.siznow = 0;
Descript.number = 0;
/* indicate success */
return 1;
}
struct {
unsigned long magic; /* magic word 0xfdc4a7dc */
unsigned char type; /* type of current member (1) */
unsigned char method; /* packing method of member (0..2) */
unsigned long posnxt; /* position of next member */
unsigned long posdat; /* position of data */
unsigned short datdos; /* date (in DOS format) */
unsigned short timdos; /* time (in DOS format) */
unsigned short crcdat; /* crc value of member */
unsigned long sizorg; /* uncompressed size of member */
unsigned long siznow; /* compressed size of member */
unsigned char majver; /* major version needed to extract */
unsigned char minver; /* minor version needed to extract */
unsigned char delete; /* 1 if member is deleted, 0 else */
unsigned char spared; /* spare entry to pad entry */
unsigned long poscmt; /* position of comment, 0 if none */
unsigned short sizcmt; /* length of comment, 0 if none */
char nams [14]; /* short name of member or archive */
unsigned short lvar; /* length of variable part */
unsigned char timzon; /* time zone */
unsigned short crcent; /* crc value of entry */
unsigned char lnamu; /* length of long name */
unsigned char ldiru; /* length of directory */
char namu [256]; /* univ. name of member of archive */
char diru [256]; /* univ. name of directory */
unsigned short system; /* system identifier */
unsigned long permis; /* file permissions */
unsigned char modgen; /* gens. on, last gen., gen. limit */
unsigned short ver; /* version number of member */
/* the following are not in the archive file and are computed */
char naml [256]; /* local name of member of archive */
char dirl [256]; /* local name of directory */
char patl [512]; /* local path name of member */
char patv [512]; /* ditto but with version number */
char * patw; /* name used by '-l' */
unsigned long year; /* years since 1900 */
unsigned long month; /* month since January */
unsigned long day; /* day of month */
unsigned long hour; /* hours since midnight */
unsigned long min; /* minutes after the hour */
unsigned long sec; /* seconds after the minutes */
} Entry;
int EntrReadArch ()
{
unsigned long l; /* 'Entry.lnamu+Entry.ldiru' */
char * p; /* loop variable */
/* try to read the magic words */
if ( (Entry.magic = WordReadArch()) != (unsigned long)0xfdc4a7dcL )
return 0;
/* read the fixed part of the directory entry */
Entry.type = ByteReadArch();
Entry.method = ByteReadArch();
Entry.posnxt = WordReadArch();
Entry.posdat = WordReadArch();
Entry.datdos = HalfReadArch();
Entry.timdos = HalfReadArch();
Entry.crcdat = HalfReadArch();
Entry.sizorg = WordReadArch();
Entry.siznow = WordReadArch();
Entry.majver = ByteReadArch();
Entry.minver = ByteReadArch();
Entry.delete = ByteReadArch();
Entry.spared = ByteReadArch();
Entry.poscmt = WordReadArch();
Entry.sizcmt = HalfReadArch();
BlckReadArch(Entry.nams,13L); Entry.nams[13] = '\0';
/* handle the long name and the directory in the variable part */
Entry.lvar = (Entry.type == 2 ? HalfReadArch() : 0);
Entry.timzon = (Entry.type == 2 ? ByteReadArch() : 127);
Entry.crcent = (Entry.type == 2 ? HalfReadArch() : 0);
Entry.lnamu = (0 < Entry.lvar ? ByteReadArch() : 0);
Entry.ldiru = (1 < Entry.lvar ? ByteReadArch() : 0);
BlckReadArch(Entry.namu,(unsigned long)Entry.lnamu);
Entry.namu[Entry.lnamu] = '\0';
BlckReadArch(Entry.diru,(unsigned long)Entry.ldiru);
Entry.diru[Entry.ldiru] = '\0';
l = Entry.lnamu + Entry.ldiru;
Entry.system = (l+2 < Entry.lvar ? HalfReadArch() : 0);
Entry.permis = (l+4 < Entry.lvar ? TripReadArch() : 0);
Entry.modgen = (l+7 < Entry.lvar ? ByteReadArch() : 0);
Entry.ver = (l+7 < Entry.lvar ? HalfReadArch() : 0);
/* convert the names to local format */
if ( Entry.system == 0 || Entry.system == 2 ) {
CONV_DIRE( Entry.dirl, Entry.diru );
CONV_NAME( Entry.naml, (Entry.lnamu ? Entry.namu : Entry.nams) );
}
else {
strcpy( Entry.dirl, Entry.diru );
strcpy( Entry.naml, (Entry.lnamu ? Entry.namu : Entry.nams) );
}
strcpy( Entry.patl, Entry.dirl );
strcat( Entry.patl, Entry.naml );
/* create the name with the version appended */
strcpy( Entry.patv, Entry.patl );
p = Entry.patv; while ( *p != '\0' ) p++;
*p++ = ';';
for ( l = 10000; 0 < l; l /= 10 )
if ( l == 1 || l <= Entry.ver )
*p++ = (Entry.ver / l) % 10 + '0';
*p = '\0';
Entry.patw = ((Entry.modgen&0xc0)!=0x80 ? Entry.patl : Entry.patv);
/* convert the time */
Entry.year = ((Entry.datdos >> 9) & 0x7f) + 80;
Entry.month = ((Entry.datdos >> 5) & 0x0f) - 1;
Entry.day = ((Entry.datdos ) & 0x1f);
Entry.hour = ((Entry.timdos >> 11) & 0x1f);
Entry.min = ((Entry.timdos >> 5) & 0x3f);
Entry.sec = ((Entry.timdos ) & 0x1f) * 2;
/* indicate success */
return 1;
}
/****************************************************************************
**
*F OpenReadFile(<patl>,<bin>) . . . . . . . . . . . open a file for reading
*F ClosReadFile() . . . . . . . . . . . . . . . . . . . close a file again
*F BlckReadFile(<blk>,<len>) . . . . . . . write a block of bytes to a file
*F BufFile[] . . . . . . . . . . . . . . . . . . . . . . buffer for the file
**
** 'OpenReadFile' tries to open the archive with local path name <patl> (as
** converted by 'CONV_NAME' and 'CONV_DIRE') for reading and returns 1 to
** indicate success and 0 to indicate that the file cannot be opened. If
** <bin> is 0, the file is opened as a text file, otherwise the file is
** opened as a binary file.
**
** 'ClosReadFile' closes the file again.
**
** 'BlckReadFile' reads <len> bytes from the file to the buffer <blk> and
** returns the number of bytes actually read. If no file is open
** 'BlckReadFile' only returns 0.
**
** 'BufFile' is a buffer for the file (which is not used by the above
** functions).
*/
unsigned long IsOpenReadFile;
int OpenReadFile ( patl, bin )
char * patl;
unsigned long bin;
{
if ( bin == 0 && OPEN_READ_TEXT(patl) ) {
IsOpenReadFile = 1;
return 1;
}
else if ( bin == 1 && OPEN_READ_BINR(patl) ) {
IsOpenReadFile = 2;
return 1;
}
else {
return 0;
}
}
int ClosReadFile ()
{
if ( IsOpenReadFile == 1 ) {
IsOpenReadFile = 0;
return CLOS_READ_TEXT();
}
else if ( IsOpenReadFile == 2 ) {
IsOpenReadFile = 0;
return CLOS_READ_BINR();
}
else {
return 0;
}
}
unsigned long BlckReadFile ( blk, len )
char * blk;
unsigned long len;
{
if ( IsOpenReadFile == 1 ) {
return BLCK_READ_TEXT( blk, len );
}
else if ( IsOpenReadFile == 2 ) {
return BLCK_READ_BINR( blk, len );
}
else {
return 0;
}
}
char BufFile [8192]; /* at least MAX_OFF */
/****************************************************************************
**
*F OpenWritFile(<patl>,<bin>) . . . . . . . . . . . open a file for writing
*F ClosWritFile() . . . . . . . . . . . . . . . . . . . close a file again
*F BlckWritFile(<blk>,<len>) . . . . . . . write a block of bytes to a file
**
** 'OpenWritFile' tries to open the archive with local path name <patl> (as
** converted by 'CONV_NAME' and 'CONV_DIRE') for writing and returns 1 to
** indicate success and 0 to indicate that the file cannot be opened. If
** <bin> is 0, the file is opened as a text file, otherwise the file is
** opened as a binary file.
**
** 'ClosWritFile' closes the file again.
**
** 'BlckWritFile' writes <len> bytes from the buffer <blk> to the file and
** returns the number of bytes actually written, which is less than <len>
** only when a write error happened. If no file is open 'BlckWritFile' only
** returns <len>.
*/
unsigned long IsOpenWritFile;
int OpenWritFile ( patl, bin )
char * patl;
unsigned long bin;
{
if ( patl == 0 ) {
IsOpenWritFile = 1;
return 1;
}
else if ( bin == 1 && OPEN_WRIT_TEXT(patl) ) {
IsOpenWritFile = 2;
return 1;
}
else if ( bin == 2 && OPEN_WRIT_BINR(patl) ) {
IsOpenWritFile = 3;
return 1;
}
#ifdef SYS_IS_MAC_MPW
else if ( bin == 3 && OPEN_WRIT_MACB(patl) ) {
IsOpenWritFile = 4;
return 1;
}
#endif
else {
return 0;
}
}
int ClosWritFile ()
{
if ( IsOpenWritFile == 1 ) {
return 1;
}
else if ( IsOpenWritFile == 2 ) {
IsOpenWritFile = 0;
return CLOS_WRIT_TEXT();
}
else if ( IsOpenWritFile == 3 ) {
IsOpenWritFile = 0;
return CLOS_WRIT_BINR();
}
#ifdef SYS_IS_MAC_MPW
else if ( IsOpenWritFile == 4 ) {
IsOpenWritFile = 0;
return CLOS_WRIT_MACB();
}
#endif
else {
return 0;
}
}
unsigned long BlckWritFile ( blk, len )
char * blk;
unsigned long len;
{
unsigned long i; /* loop variable */
if ( IsOpenWritFile == 1 ) {
for ( i = 0; i < len; i++ )
putchar( blk[i] );
return len;
}
else if ( IsOpenWritFile == 2 ) {
return BLCK_WRIT_TEXT( blk, len );
}
else if ( IsOpenWritFile == 3 ) {
return BLCK_WRIT_BINR( blk, len );
}
#ifdef SYS_IS_MAC_MPW
else if ( IsOpenWritFile == 4 ) {
#ifdef SYS_IS_MAC_THC
return BLCK_WRIT_MACB( (StringPtr)blk, len );
#else
return BLCK_WRIT_MACB( blk, len );
#endif
}
#endif
else {
return len;
}
}
/****************************************************************************
**
*V Crc . . . . . . . . . . . . . . . . current cyclic redundancy check value
*F CRC_BYTE(<crc>,<byte>) . . . . . cyclic redundancy check value of a byte
*F InitCrc() . . . . . . . . . . . . initialize cylic redundancy check table
**
** 'Crc' is used by the decoding functions to communicate the computed
** CRC-16 value to the calling function.
**
** 'CRC_BYTE' returns the new value that one gets by updating the old CRC-16
** value <crc> with the additional byte <byte>. It is used to compute the
** ANSI CRC-16 value for each member of the archive. They idea is that if
** not too many bits of a member have corrupted, then the CRC-16 will be
** different, and so the corruption can be detected.
**
** 'InitCrc' initialize the table that 'CRC_BYTE' uses. You must call this
** before using 'CRC_BYTE'.
**
** The ANSI CRC-16 value for a sequence of bits of lenght <length> is
** computed by shifting the bits through the following shift register (where
** 'O' are the latches and '+' denotes logical xor)
**
** bit bit ... bit bit bit -->-
** <length> <length>-1 3 2 1 |
** V
** -<-------<---------------------------------------------------<----+
** | | | ^
** V V V |
** ->O-->O-+>O-->O-->O-->O-->O-->O-->O-->O-->O-->O-->O-->O-->O-+>O-->-
** MSB LSB
**
** Mathematically we compute in the polynomial ring $GF(2)[x]$ the remainder
**
** $$\sum_{i=1}^{i=length}{bit_i x^{length+16-i}} mod crcpol$$
**
** where $crcpol = x^{16} + x^{15} + x^2 + 1$. Then the CRC-16 value
** consists of the coefficients of the remainder, with the constant
** coefficient being the most significant bit (MSB) and the coefficient of
** $x^{15}$ the least significant bit (LSB).
**
** Changing a single bit will always cause the CRC-16 value to change,
** because $x^{i} mod crcpol$ is never zero.
**
** Changing two bits will cause the CRC-16 value to change, unless the
** distance between the bits is a multiple of 32767, which is the order of
** $x$ modulo $crcpol = (x+1)(x^{15} + x + 1)$ ($x^{15}+x+1$ is primitive).
**
** Changing 16 adjacent bits will always cause the CRC value to change,
** because $x^{16}$ and $crcpol$ are relatively prime.
**
** David Schwaderer provided the CRC-16 calculation in PC Tech Journal 4/85.
*/
unsigned long Crc;
unsigned long CrcTab [256];
#define CRC_BYTE(crc,byte) (((crc)>>8) ^ CrcTab[ ((crc)^(byte))&0xff ])
int InitCrc ()
{
unsigned long i, k; /* loop variables */
for ( i = 0; i < 256; i++ ) {
CrcTab[i] = i;
for ( k = 0; k < 8; k++ )
CrcTab[i] = (CrcTab[i]>>1) ^ ((CrcTab[i] & 1) ? 0xa001 : 0);
}
return 1;
}
/****************************************************************************
**
*V ErrMsg . . . . . . . . . . . . . . . . . . . . . . . . . . error message
**
** 'ErrMsg' is used by the decode functions to communicate the cause of an
** error to the calling function.
*/
char * ErrMsg;
/****************************************************************************
**
*F DecodeCopy(<size>). . . . . . . . . . . . extract an uncompressed member
**
** 'DecodeCopy' simply copies <size> bytes from the archive to the output
** file.
*/
int DecodeCopy ( size )
unsigned long size;
{
unsigned long siz; /* size of current block */
unsigned long crc; /* CRC-16 value */
unsigned long i; /* loop variable */
/* initialize the crc value */
crc = 0;
/* loop until everything has been copied */
while ( 0 < size ) {
/* read as many bytes as possible in one go */
siz = (sizeof(BufFile) < size ? sizeof(BufFile) : size);
if ( BlckReadArch( BufFile, siz ) != siz ) {
ErrMsg = "unexpected <eof> in the archive";
return 0;
}
/* write them */
if ( BlckWritFile( BufFile, siz ) != siz ) {
ErrMsg = "cannot write output file";
return 0;
}
/* compute the crc */
for ( i = 0; i < siz; i++ )
crc = CRC_BYTE( crc, BufFile[i] );
/* on to the next block */
size -= siz;
}
/* store the crc and indicate success */
Crc = crc;
return 1;
}
/****************************************************************************
**
*F DecodeLzd() . . . . . . . . . . . . . . . extract a LZ compressed member
**
*N 1993/10/21 martin add LZD.
*/
int DecodeLzd ()
{
ErrMsg = "LZD not yet implemented";
return 0;
}
/****************************************************************************
**
*F DecodeLzh() . . . . . . . . . . . . . . . extract a LZH compressed member
**
** 'DecodeLzh' decodes a LZH (Lempel-Ziv 77 with dynamic Huffman coding)
** encoded member from the archive to the output file.
**
** Each member is encoded as a series of blocks. Each block starts with a
** 16 bit field that contains the number of codes in this block <number>.
** The member is terminated by a block with 0 codes.
**
** Next each block contains the description of three Huffman codes, called
** pre code, literal/length code, and log code. The purpose of the pre code
** is to encode the description of the literal/length code. The purpose of
** the literal/length code and the log code is to encode the appropriate
** fields in the LZ code. I am too stupid to understand the format of the
** description.
**
** Then each block contains <number> codewords. There are two kinds of
** codewords, *literals* and *copy instructions*.
**
** A literal represents a certain byte. For the moment imaging the literal
** as having 9 bits. The first bit is zero, the other 8 bits contain the
** byte.
**
** +--+----------------+
** | 0| <byte> |
** +--+----------------+
**
** When a literal is encountered, the byte <byte> that it represents is
** appended to the output.
**
** A copy instruction represents a certain sequence of bytes that appeared
** already earlier in the output. The copy instruction consists of three
** parts, the length, the offset logarithm, and the offset mantissa.
**
** +--+----------------+--------+--------------------+
** | 1| <length>-3 | <log> | <mantissa> |
** +--+----------------+--------+--------------------+
**
** <length> is the length of the sequence which this copy instruction
** represents. We store '<length>-3', because <length> is never 0, 1, or 2;
** such sequences are better represented by 0, 1, or 2 literals. <log> and
** <mantissa> together represent the offset at which the sequence of bytes
** already appeared. '<log>-1' is the number of bits in the <mantissa>
** field, and the offset is $2^{<log>-1} + <mantissa>$. For example
**
** +--+----------------+--------+----------+
** | 1| 9 | 6 | 0 1 1 0 1|
** +--+----------------+--------+----------+
**
** represents the sequence of 12 bytes that appeared $2^5 + 8 + 4 + 1 = 45$
** bytes earlier in the output (so those 18 bits of input represent 12 bytes
** of output).
**
** When a copy instruction is encountered, the sequence of <length> bytes
** that appeared <offset> bytes earlier in the output is again appended
** (copied) to the output. For this purpose the last <max> bytes are
** remembered, where <max> is the maximal used offset. In 'zoo' this
** maximal offset is $2^{13} = 8192$. The buffer in which those bytes are
** remembered is called a sliding window for reasons that should be
** obvious.
**
** To save even more space the first 9 bits of each code, which represent
** the type of code and either the literal value or the length, are encoded
** using a Huffman code called the literal/length code. Also the next 4
** bits in copy instructions, which represent the logarithm of the offset,
** are encoded using a second Huffman code called the log code.
**
** Those codes are fixed, i.e., not adaptive, but may vary between the
** blocks, i.e., in each block literals/lengths and logs may be encoded by
** different codes. The codes are described at the beginning of each block.
**
** Haruhiko Okumura wrote the LZH code (originally for his 'ar' archiver).
*/
#define MAX_LIT 255 /* maximal literal code */
#define MIN_LEN 3 /* minimal length of match */
#define MAX_LEN 256 /* maximal length of match */
#define MAX_CODE (MAX_LIT+1 + MAX_LEN+1 - MIN_LEN)
#define BITS_CODE 9 /* 2^BITS_CODE > MAX_CODE (+1?) */
#define MAX_OFF 8192 /* 13 bit sliding directory */
#define MAX_LOG 13 /* maximal log_2 of offset */
#define BITS_LOG 4 /* 2^BITS_LOG > MAX_LOG (+1?) */
#define MAX_PRE 18 /* maximal pre code */
#define BITS_PRE 5 /* 2^BITS_PRE > MAX_PRE (+1?) */
unsigned short TreeLeft [2*MAX_CODE+1];/* tree for codes (upper half) */
unsigned short TreeRight[2*MAX_CODE+1];/* and for offsets (lower half) */
unsigned short TabCode [4096]; /* table for fast lookup of codes */
unsigned char LenCode [MAX_CODE+1]; /* number of bits used for code */
unsigned short TabLog [256]; /* table for fast lookup of logs */
unsigned char LenLog [MAX_LOG+1]; /* number of bits used for logs */
unsigned short TabPre [256]; /* table for fast lookup of pres */
unsigned char LenPre [MAX_PRE+1]; /* number of bits used for pres */
int MakeTablLzh ( nchar, bitlen, tablebits, table )
int nchar;
unsigned char bitlen[];
int tablebits;
unsigned short table[];
{
unsigned short count[17], weight[17], start[18], *p;
unsigned int i, k, len, ch, jutbits, avail, mask;
for (i = 1; i <= 16; i++) count[i] = 0;
for (i = 0; i < nchar; i++) count[bitlen[i]]++;
start[1] = 0;
for (i = 1; i <= 16; i++)
start[i + 1] = start[i] + (count[i] << (16 - i));
if (start[17] != (unsigned short)((unsigned) 1 << 16))
return 0;
jutbits = 16 - tablebits;
for (i = 1; i <= tablebits; i++) {
start[i] >>= jutbits;
weight[i] = (unsigned) 1 << (tablebits - i);
}
while (i <= 16) {
weight[i] = (unsigned) 1 << (16 - i);
i++;
}
i = start[tablebits + 1] >> jutbits;
if (i != (unsigned short)((unsigned) 1 << 16)) {
k = 1 << tablebits;
while (i != k) table[i++] = 0;
}
avail = nchar;
mask = (unsigned) 1 << (15 - tablebits);
for (ch = 0; ch < nchar; ch++) {
if ((len = bitlen[ch]) == 0) continue;
if (len <= tablebits) {
for ( i = 0; i < weight[len]; i++ ) table[i+start[len]] = ch;
}
else {
k = start[len];
p = &table[k >> jutbits];
i = len - tablebits;
while (i != 0) {
if (*p == 0) {
TreeRight[avail] = TreeLeft[avail] = 0;
*p = avail++;
}
if (k & mask) p = &TreeRight[*p];
else p = &TreeLeft[*p];
k <<= 1; i--;
}
*p = ch;
}
start[len] += weight[len];
}
/* indicate success */
return 1;
}
int DecodeLzh ()
{
unsigned long cnt; /* number of codes in block */
unsigned long cnt2; /* number of stuff in pre code */
unsigned long code; /* code from the Archive */
unsigned long len; /* length of match */
unsigned long log; /* log_2 of offset of match */
unsigned long off; /* offset of match */
unsigned long pre; /* pre code */
char * cur; /* current position in BufFile */
char * pos; /* position of match */
char * end; /* pointer to the end of BufFile */
char * stp; /* stop pointer during copy */
unsigned long crc; /* cyclic redundancy check value */
unsigned long i; /* loop variable */
unsigned long bits; /* the bits we are looking at */
unsigned long bitc; /* number of bits that are valid */
#define PEEK_BITS(N) ((bits >> (bitc-(N))) & ((1L<<(N))-1))
#define FLSH_BITS(N) if ( (bitc -= (N)) < 16 ) { bits = (bits<<16) + FlahReadArch(); bitc += 16; }
/* initialize bit source, output pointer, and crc */
bits = 0; bitc = 0; FLSH_BITS(0);
cur = BufFile; end = BufFile + MAX_OFF;
crc = 0;
/* loop until all blocks have been read */
cnt = PEEK_BITS( 16 ); FLSH_BITS( 16 );
while ( cnt != 0 ) {
/* read the pre code */
cnt2 = PEEK_BITS( BITS_PRE ); FLSH_BITS( BITS_PRE );
if ( cnt2 == 0 ) {
pre = PEEK_BITS( BITS_PRE ); FLSH_BITS( BITS_PRE );
for ( i = 0; i < 256; i++ ) TabPre[i] = pre;
for ( i = 0; i <= MAX_PRE; i++ ) LenPre[i] = 0;
}
else {
i = 0;
while ( i < cnt2 ) {
len = PEEK_BITS( 3 ); FLSH_BITS( 3 );
if ( len == 7 ) {
while ( PEEK_BITS( 1 ) ) { len++; FLSH_BITS( 1 ); }
FLSH_BITS( 1 );
}
LenPre[i++] = len;
if ( i == 3 ) {
len = PEEK_BITS( 2 ); FLSH_BITS( 2 );
while ( 0 < len-- ) LenPre[i++] = 0;
}
}
while ( i <= MAX_PRE ) LenPre[i++] = 0;
if ( ! MakeTablLzh( MAX_PRE+1, LenPre, 8, TabPre ) ) {
ErrMsg = "pre code description corrupted";
return 0;
}
}
/* read the code (using the pre code) */
cnt2 = PEEK_BITS( BITS_CODE ); FLSH_BITS( BITS_CODE );
if ( cnt2 == 0 ) {
code = PEEK_BITS( BITS_CODE ); FLSH_BITS( BITS_CODE );
for ( i = 0; i < 4096; i++ ) TabCode[i] = code;
for ( i = 0; i <= MAX_CODE; i++ ) LenCode[i] = 0;
}
else {
i = 0;
while ( i < cnt2 ) {
len = TabPre[ PEEK_BITS( 8 ) ];
if ( len <= MAX_PRE ) {
FLSH_BITS( LenPre[len] );
}
else {
FLSH_BITS( 8 );
do {
if ( PEEK_BITS( 1 ) ) len = TreeRight[len];
else len = TreeLeft [len];
FLSH_BITS( 1 );
} while ( MAX_PRE < len );
}
if ( len <= 2 ) {
if ( len == 0 ) {
len = 1;
}
else if ( len == 1 ) {
len = PEEK_BITS(4)+3; FLSH_BITS(4);
}
else {
len = PEEK_BITS(BITS_CODE)+20; FLSH_BITS(BITS_CODE);
}
while ( 0 < len-- ) LenCode[i++] = 0;
}
else {
LenCode[i++] = len - 2;
}
}
while ( i <= MAX_CODE ) LenCode[i++] = 0;
if ( ! MakeTablLzh( MAX_CODE+1, LenCode, 12, TabCode ) ) {
ErrMsg = "literal/length code description corrupted";
return 0;
}
}
/* read the log_2 of offsets */
cnt2 = PEEK_BITS( BITS_LOG ); FLSH_BITS( BITS_LOG );
if ( cnt2 == 0 ) {
log = PEEK_BITS( BITS_LOG ); FLSH_BITS( BITS_LOG );
for ( i = 0; i < 256; i++ ) TabLog[i] = log;
for ( i = 0; i <= MAX_LOG; i++ ) LenLog[i] = 0;
}
else {
i = 0;
while ( i < cnt2 ) {
len = PEEK_BITS( 3 ); FLSH_BITS( 3 );
if ( len == 7 ) {
while ( PEEK_BITS( 1 ) ) { len++; FLSH_BITS( 1 ); }
FLSH_BITS( 1 );
}
LenLog[i++] = len;
}
while ( i <= MAX_LOG ) LenLog[i++] = 0;
if ( ! MakeTablLzh( MAX_LOG+1, LenLog, 8, TabLog ) ) {
ErrMsg = "log code description corrupted";
return 0;
}
}
/* read the codes */
while ( 0 < cnt-- ) {
/* try to decode the code the fast way */
code = TabCode[ PEEK_BITS( 12 ) ];
/* if this code needs more than 12 bits look it up in the tree */
if ( code <= MAX_CODE ) {
FLSH_BITS( LenCode[code] );
}
else {
FLSH_BITS( 12 );
do {
if ( PEEK_BITS( 1 ) ) code = TreeRight[code];
else code = TreeLeft [code];
FLSH_BITS( 1 );
} while ( MAX_CODE < code );
}
/* if the code is a literal, stuff it into the buffer */
if ( code <= MAX_LIT ) {
*cur++ = code;
crc = CRC_BYTE( crc, code );
if ( cur == end ) {
if ( BlckWritFile(BufFile,cur-BufFile) != cur-BufFile ) {
ErrMsg = "cannot write output file";
return 0;
}
cur = BufFile;
}
}
/* otherwise compute match length and offset and copy */
else {
len = code - (MAX_LIT+1) + MIN_LEN;
/* try to decodes the log_2 of the offset the fast way */
log = TabLog[ PEEK_BITS( 8 ) ];
/* if this log_2 needs more than 8 bits look in the tree */
if ( log <= MAX_LOG ) {
FLSH_BITS( LenLog[log] );
}
else {
FLSH_BITS( 8 );
do {
if ( PEEK_BITS( 1 ) ) log = TreeRight[log];
else log = TreeLeft [log];
FLSH_BITS( 1 );
} while ( MAX_LOG < log );
}
/* compute the offset */
if ( log == 0 ) {
off = 0;
}
else {
off = ((unsigned)1 << (log-1)) + PEEK_BITS( log-1 );
FLSH_BITS( log-1 );
}
/* copy the match (this accounts for ~ 50% of the time) */
pos = BufFile + (((cur-BufFile) - off - 1) & (MAX_OFF - 1));
if ( cur < end-len && pos < end-len ) {
stp = cur + len;
do {
code = *pos++;
crc = CRC_BYTE( crc, code );
*cur++ = code;
} while ( cur < stp );
}
else {
while ( 0 < len-- ) {
code = *pos++;
crc = CRC_BYTE( crc, code );
*cur++ = code;
if ( pos == end ) {
pos = BufFile;
}
if ( cur == end ) {
if ( BlckWritFile(BufFile,cur-BufFile)
!= cur-BufFile ) {
ErrMsg = "cannot write output file";
return 0;
}
cur = BufFile;
}
}
}
}
}
cnt = PEEK_BITS( 16 ); FLSH_BITS( 16 );
}
/* write out the rest of the buffer */
if ( BlckWritFile(BufFile,cur-BufFile) != cur-BufFile ) {
ErrMsg = "cannot write output file";
return 0;
}
/* indicate success */
Crc = crc;
return 1;
}
/****************************************************************************
**
*F ListArch(<ver>,<arc>,<filec>,<files>) . . list the members of the archive
**
** 'ListArch' lists the members of the archive with the name <arc> that
** match one of the file name patterns '<files>[0] .. <files>[<filec>-1]'.
** If <ver> is 1, comments are also printed.
*/
unsigned long BeginMonth [12] = {
0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334
};
char NameMonth [12] [4] = {
"Jan","Feb","Mar","Apr","May","Jun","Jul","Aug","Sep","Oct","Nov","Dec"
};
int ListArch ( ver, arc, filec, files )
unsigned long ver;
char * arc;
unsigned long filec;
char * files [];
{
char arczoo [256]; /* <arc> with '.zoo' tacked on */
int chr; /* character from comment */
unsigned long i; /* loop variable */
/* try to open the archive under various names */
strcpy(arczoo,arc); strcat(arczoo,".zoo");
if ( OpenReadArch(arc) ) {
if ( ! DescReadArch() ) {
ClosReadArch();
if ( ! OpenReadArch(arczoo) || ! DescReadArch() ) {
printf("unzoo: found bad description in archive '%s'\n",arc);
return 0;
}
}
}
else if ( OpenReadArch(arczoo) ) {
if ( ! DescReadArch() ) {
printf("unzoo: found bad description in archive '%s'\n",arczoo);
return 0;
}
}
else {
printf("unzoo: could not open archive '%s'\n",arc);
return 0;
}
/* if present, print the archive comment */
if ( ver && Descript.sizcmt != 0 ) {
if ( ! GotoReadArch( Descript.poscmt ) ) {
printf("unzoo: cannot find comment in archive '%s'\n",arc);
return 0;
}
chr = '\n';
for ( i = 0; i < Descript.sizcmt; i++ ) {
if ( chr == '\n' ) printf("# ");
chr = ByteReadArch();
if ( chr == '\012' ) chr = '\n';
printf("%c",chr);
}
if ( chr != '\n' ) printf("\n");
fflush( stdout );
}
/* print the header */
printf("Length CF Size Now Date Time \n");
printf("-------- --- -------- --------- --------\n");
fflush( stdout );
/* loop over the members of the archive */
Entry.posnxt = Descript.posent;
while ( 1 ) {
/* read the directory entry for the next member */
if ( ! GotoReadArch( Entry.posnxt ) || ! EntrReadArch() ) {
printf("unzoo: found bad directory entry in archive '%s'\n",arc);
return 0;
}
if ( ! Entry.posnxt ) break;
/* skip members we don't care about */
if ( Entry.delete == 1 )
continue;
if ( filec == 0 && ! IsMatchName( "*", Entry.patw ) )
continue;
for ( i = 0; i < filec; i++ )
if ( IsMatchName( files[i], Entry.patv )
|| IsMatchName( files[i], Entry.patw ) )
break;
if ( filec != 0 && i == filec )
continue;
/* print the information about the member */
printf("%8lu %3lu%% %8lu %2lu %3s %02lu %02lu:%02lu:%02lu %s\n",
Entry.sizorg,
(100*(Entry.sizorg-Entry.siznow)+Entry.sizorg/2)
/ (Entry.sizorg != 0 ? Entry.sizorg : 1),
Entry.siznow,
Entry.day, NameMonth[Entry.month], Entry.year % 100,
Entry.hour, Entry.min, Entry.sec,
(ver ? Entry.patv : Entry.patw) );
fflush( stdout );
/* update the counts for the whole archive */
Descript.sizorg += Entry.sizorg;
Descript.siznow += Entry.siznow;
Descript.number += 1;
/* if present print the file comment */
if ( ver && Entry.sizcmt != 0 ) {
if ( ! GotoReadArch( Entry.poscmt ) ) {
printf("unzoo: cannot find comment in archive '%s'\n",arc);
return 0;
}
chr = '\n';
for ( i = 0; i < Entry.sizcmt; i++ ) {
if ( chr == '\n' ) printf("# ");
chr = ByteReadArch();
if ( chr == '\012' ) chr = '\n';
printf("%c",chr);
}
if ( chr != '\n' ) printf("\n");
}
fflush( stdout );
}
/* print the footer */
printf("-------- --- -------- --------- --------\n");
printf("%8lu %3lu%% %8lu %4lu files\n",
Descript.sizorg,
(100*(Descript.sizorg-Descript.siznow)+Descript.sizorg/2)
/ (Descript.sizorg != 0 ? Descript.sizorg : 1),
Descript.siznow,
Descript.number );
fflush( stdout );
/* close the archive file */
if ( ! ClosReadArch() ) {
printf("unzoo: could not close archive '%s'\n",arc);
return 0;
}
/* indicate success */
return 1;
}
/****************************************************************************
**
*F ExtrArch(<bim>,<out>,<ovr>,<pre>,<arc>,<filec>,<files>) . extract members
**
** 'ExtrArch' extracts the members of the archive with the name <arc> that
** match one of the file name patterns '<files>[0] .. <files>[<filec>-1]'.
** If <bim> is 0, members with comments starting with '!TEXT!' are extracted
** as text files and the other members are extracted as binary files; if it
** is 1, all members are extracted as text files; if it is 2, all members
** are extracted as binary files. If <out> is 0, no members are extracted
** and only tested for integrity; if it is 1, the members are printed to
** stdout, i.e., to the screen. and if it is 2, the members are extracted.
** If <ovr> is 0, members will not overwrite existing files; otherwise they
** will. <pre> is a prefix that is prepended to all path names.
*/
int ExtrArch ( bim, out, ovr, pre, arc, filec, files )
unsigned long bim;
unsigned long out;
unsigned long ovr;
char * pre;
char * arc;
unsigned long filec;
char * files [];
{
char arczoo [256]; /* <arc> with '.zoo' tacked on */
char ans [256]; /* to read the answer */
char patl [1024]; /* local name with prefix */
unsigned long bin; /* extraction mode text/binary */
unsigned long res; /* status of decoding */
unsigned long secs; /* seconds since 70/01/01 00:00:00 */
unsigned long i; /* loop variable */
/* try to open the archive under various names */
strcpy(arczoo,arc); strcat(arczoo,".zoo");
if ( OpenReadArch(arc) ) {
if ( ! DescReadArch() ) {
ClosReadArch();
if ( ! OpenReadArch(arczoo) || ! DescReadArch() ) {
printf("unzoo: found bad description in archive '%s'\n",arc);
return 0;
}
}
}
else if ( OpenReadArch(arczoo) ) {
if ( ! DescReadArch() ) {
printf("unzoo: found bad description in archive '%s'\n",arczoo);
return 0;
}
}
else {
printf("unzoo: could not open archive '%s'\n",arc);
return 0;
}
/* test if the archive has a comment starting with '!TEXT!' */
if ( bim == 0
&& 6 <= Descript.sizcmt && GotoReadArch( Descript.poscmt )
&& ByteReadArch() == '!' && ByteReadArch() == 'T'
&& ByteReadArch() == 'E' && ByteReadArch() == 'X'
&& ByteReadArch() == 'T' && ByteReadArch() == '!' )
bim = 1;
/* test if the archive has a comment starting with '!MACBINARY!' */
#ifdef SYS_IS_MAC_MPW
else if ( bim == 0
&& 11 <= Descript.sizcmt && GotoReadArch( Descript.poscmt )
&& ByteReadArch() == '!' && ByteReadArch() == 'M'
&& ByteReadArch() == 'A' && ByteReadArch() == 'C'
&& ByteReadArch() == 'B' && ByteReadArch() == 'I'
&& ByteReadArch() == 'N' && ByteReadArch() == 'A'
&& ByteReadArch() == 'R' && ByteReadArch() == 'Y'
&& ByteReadArch() == '!' )
bim = 3;
#endif
/* loop over the members of the archive */
Entry.posnxt = Descript.posent;
while ( 1 ) {
/* read the directory entry for the next member */
if ( ! GotoReadArch( Entry.posnxt ) || ! EntrReadArch() ) {
printf("unzoo: found bad directory entry in archive '%s'\n",arc);
return 0;
}
if ( ! Entry.posnxt ) break;
/* skip members we don't care about */
if ( Entry.delete == 1 )
continue;
if ( filec == 0 && ! IsMatchName( "*", Entry.patw ) )
continue;
for ( i = 0; i < filec; i++ )
if ( IsMatchName( files[i], Entry.patv )
|| IsMatchName( files[i], Entry.patw ) )
break;
if ( filec != 0 && i == filec )
continue;
/* check that we can decode this file */
if ( (2 < Entry.method) || (2 < Entry.majver)
|| (2 == Entry.majver && 1 < Entry.minver) ) {
printf("unzoo: unknown method, you need a later version\n");
continue;
}
/* check that such a file does not already exist */
strcpy( patl, pre ); strcat( patl, Entry.patl );
if ( out == 2 && ovr == 0 && OpenReadFile(patl,0L) ) {
ClosReadFile();
do {
printf("'%s' exists, overwrite it? (Yes/No/All/Ren): ",patl);
fflush( stdout );
if ( fgets( ans, sizeof(ans), stdin ) == (char*)0 )
return 0;
} while ( *ans!='y' && *ans!='n' && *ans!='a' && *ans!='r'
&& *ans!='Y' && *ans!='N' && *ans!='A' && *ans!='R' );
if ( *ans == 'n' || *ans == 'N' ) {
continue;
}
else if ( *ans == 'a' || *ans == 'A' ) {
ovr = 1;
}
else if ( *ans == 'r' || *ans == 'R' ) {
do {
printf("enter a new local path name: ");
fflush( stdout );
if ( fgets( patl, sizeof(patl), stdin ) == (char*)0 )
return 0;
for ( i = 0; patl[i] != '\0' && patl[i] != '\n'; i++ ) ;
patl[i] = '\0';
} while ( OpenReadFile(patl,0L) && ClosReadFile() );
}
}
/* decide whether or not we want to open the file binary */
if ( bim == 0
&& 6 <= Entry.sizcmt && GotoReadArch( Entry.poscmt )
&& ByteReadArch() == '!' && ByteReadArch() == 'T'
&& ByteReadArch() == 'E' && ByteReadArch() == 'X'
&& ByteReadArch() == 'T' && ByteReadArch() == '!' )
bin = 1;
#ifdef SYS_IS_MAC_MPW
else if ( bim == 0
&& 11 <= Entry.sizcmt && GotoReadArch( Entry.poscmt )
&& ByteReadArch() == '!' && ByteReadArch() == 'M'
&& ByteReadArch() == 'A' && ByteReadArch() == 'C'
&& ByteReadArch() == 'B' && ByteReadArch() == 'I'
&& ByteReadArch() == 'N' && ByteReadArch() == 'A'
&& ByteReadArch() == 'R' && ByteReadArch() == 'Y'
&& ByteReadArch() == '!' )
bin = 3;
#endif
else if ( bim == 0 )
bin = 2;
else
bin = bim;
/* open the file for creation */
if ( out == 2 && ! OpenWritFile(patl,bin)
#ifdef MAKE_DIRE
&& (! MakeDirs(pre,Entry.diru) || ! OpenWritFile(patl,bin))
#endif
) {
printf("unzoo: '%s' cannot be created, ",patl);
#ifndef MAKE_DIRE
if ( Entry.dirl[0] != '\0' )
printf("check that the directory '%s' exists\n",Entry.dirl);
else
printf("check the permissions\n");
#else
printf("check the permissions\n");
#endif
continue;
}
/* or ``open'' stdout for printing */
if ( out == 1 )
OpenWritFile( (char*)0, 0L );
/* decode the file */
if ( ! GotoReadArch( Entry.posdat ) ) {
printf("unzoo: cannot find data in archive '%s'\n",arc);
return 0;
}
res = 0;
ErrMsg = "this should not happen";
if ( out == 0 || out == 2 )
printf("%s \t-- ",Entry.patl);
else
printf("********\n%s\n********\n",Entry.patl);
fflush( stdout );
if ( Entry.method == 0 ) res = DecodeCopy( Entry.siznow );
if ( Entry.method == 1 ) res = DecodeLzd();
if ( Entry.method == 2 ) res = DecodeLzh();
/* check that everything went ok */
if ( res == 0 ) printf("error, %s\n",ErrMsg);
else if ( Crc != Entry.crcdat ) printf("error, CRC failed\n");
else if ( out == 2 && bin == 1 ) printf("extracted as text\n");
else if ( out == 2 && bin == 2 ) printf("extracted as binary\n");
#ifdef SYS_IS_MAC_MPW
else if ( out == 2 && bin == 3 ) printf("extracted as MacBinary\n");
#endif
else if ( out == 0 ) printf("tested\n");
fflush( stdout );
/* close the file after extraction */
if ( out == 1 || out == 2 )
ClosWritFile();
/* set the file time, evt. correct for timezone of packing system */
secs = 24*60*60L*(365*(Entry.year - 70)
+ BeginMonth[Entry.month]
+ Entry.day - 1
+ (Entry.year - 69) / 4
+ (Entry.year % 4 == 0 && 1 < Entry.month)
- (Entry.year + 299) / 400
- (Entry.year % 400 == 100 && 1 < Entry.month))
+60*60L*Entry.hour + 60L*Entry.min + Entry.sec;
if ( Entry.timzon < 127 ) secs += 15*60*(Entry.timzon );
else if ( 127 < Entry.timzon ) secs += 15*60*(Entry.timzon - 256);
if ( out == 2 ) {
if ( ! SETF_TIME( patl, secs ) )
printf("unzoo: '%s' could not set the times\n",patl);
}
/* set the file permissions */
if ( out == 2 && (Entry.permis >> 22) == 1 ) {
if ( ! SETF_PERM( patl, Entry.permis ) )
printf("unzoo: '%s' could not set the permissions\n",patl);
}
}
/* close the archive file */
if ( ! ClosReadArch() ) {
printf("unzoo: could not close the archive '%s'\n",arc);
return 0;
}
/* indicate success */
return 1;
}
/****************************************************************************
**
*F HelpArch() . . . . . . . . . . . . . . . . . . . . . . . print some help
**
** 'HelpArch' prints some help about 'unzoo'.
*/
int HelpArch ()
{
printf("unzoo -- a zoo archive extractor by Martin Schoenert\n");
printf(" ($Id: unzoo.c,v 4.4 2000/05/29 08:56:57 sal Exp $)\n");
printf(" based on 'booz' version 2.0 by Rahul Dhesi\n");
printf("\n");
printf("unzoo [-l] [-v] <archive>[.zoo] [<file>..]\n");
printf(" list the members of the archive\n");
printf(" -v: list also the generation numbers and the comments\n");
printf(" <file>: list only files matching at least one pattern,\n");
printf(" '?' matches any char, '*' matches any string.\n");
printf("\n");
printf("unzoo -x [-abnpo] [-j <prefix>] <archive>[.zoo] [<file>..]\n");
printf(" extract the members of the archive\n");
printf(" -a: extract all members as text files ");
printf("(not only those with !TEXT! comments)\n");
printf(" -b: extract all members as binary files ");
printf("(even those with !TEXT! comments)\n");
printf(" -n: extract no members, only test the integrity\n");
printf(" -p: extract to stdout\n");
printf(" -o: extract over existing files\n");
printf(" -j: extract to '<prefix><membername>'\n");
printf(" <file>: extract only files matching at least one pattern,\n");
printf(" '?' matches any char, '*' matches any string.\n");
return 1;
}
/****************************************************************************
**
*F main(<argc>,<argv>) . . . . . . . . . . . . . . . . . . . . main program
**
** 'main' is the main program, it decodes the arguments and then calls the
** appropriate function.
*/
int main ( argc, argv )
int argc;
char * argv [];
{
unsigned long res; /* result of command */
unsigned long cmd; /* command help/list/extract */
unsigned long ver; /* list verbose option */
unsigned long bim; /* extraction mode option */
unsigned long out; /* output destination option */
unsigned long ovr; /* overwrite file option */
char * pre; /* prefix to prepend to path names */
char argl [256]; /* interactive command line */
int argd; /* interactive command count */
char * argw [256]; /* interactive command vector */
char * p; /* loop variable */
#ifdef SYS_IS_MAC_THC
SIOUXSettings.autocloseonquit = 1;
SIOUXSettings.asktosaveonclose = 0;
#endif
/* repeat until the user enters an empty line */
InitCrc();
IsSpec['\0'] = 1; IsSpec[';'] = 1;
argd = 1;
do {
/* scan the command line arguments */
cmd = 1; ver = 0; bim = 0; out = 2; ovr = 0;
pre = "";
while ( 1 < argc && argv[1][0] == '-' ) {
if ( argv[1][2] != '\0' ) cmd = 0;
switch ( argv[1][1] ) {
case 'l': case 'L': if ( cmd != 0 ) cmd = 1; break;
case 'v': case 'V': if ( cmd != 1 ) cmd = 0; ver = 1; break;
case 'x': case 'X': if ( cmd != 0 ) cmd = 2; break;
case 'a': case 'A': if ( cmd != 2 ) cmd = 0; bim = 1; break;
case 'b': case 'B': if ( cmd != 2 ) cmd = 0; bim = 2; break;
case 'n': case 'N': if ( cmd != 2 ) cmd = 0; out = 0; break;
case 'p': case 'P': if ( cmd != 2 ) cmd = 0; out = 1; break;
case 'o': case 'O': if ( cmd != 2 ) cmd = 0; ovr = 1; break;
case 'j': case 'J': if ( argc == 2 ) { cmd = 0; break; }
pre = argv[2]; argc--; argv++;
break;
default: cmd = 0; break;
}
argc--; argv++;
}
/* execute the command or print help */
if ( cmd == 1 && 1 < argc )
res = ListArch( ver, argv[1],
(unsigned long)argc-2, argv+2 );
else if ( cmd == 2 && 1 < argc )
res = ExtrArch( bim, out, ovr, pre, argv[1],
(unsigned long)argc-2, argv+2 );
else
res = HelpArch();
/* in interactive mode read another line */
if ( 1 < argd || argc <= 1 ) {
/* read a command line */
printf("\nEnter a command line or an empty line to quit:\n");
fflush( stdout );
if ( fgets( argl, sizeof(argl), stdin ) == (char*)0 ) break;
#ifdef SYS_IdfgdfsgasfgdsgfdS_MAC_THC
if ( *argl == '\n' && argl[1]=='\0') break;
#endif
/* parse the command line into argc */
argd = 1;
p = argl;
while ( *p==' ' || *p=='\t' || *p=='\n' ) *p++ = '\0';
while ( *p != '\0' ) {
argw[argd++] = p;
while ( *p!=' ' && *p!='\t' && *p!='\n' && *p!='\0' ) p++;
while ( *p==' ' || *p=='\t' || *p=='\n' ) *p++ = '\0';
}
argc = argd; argv = argw;
}
} while ( 1 < argd );
/* just to please lint */
return ! res;
}
View Git Blame Copy Permalink